i need help hooking up my hks vpc. i have a 1989 na swapped to turbo with a 87 ecu and harness. i need to know what pins i hook the the wires to. i do know that the red is power and the black is ground the brown is not used were do the the other two go? and with the pressure monitor were do i run that hose to?:1zhelp::1zhelp:
vpc help
- Thread starter mista_sup
- Start date
http://josh.leckner.us/vpc_safc_wiring.jpg and this for the 87 ecu pinout http://www.turboninjas.com/supra/ma...Info/MK3 Supra/1987-1988/87-88 ECU Pinout.jpg
just ignore the wires for the vpc, as for the pressue sensor, i added mine by the vac t by the brake booster, that run to the crusie and stock boost sensor. pic here http://imageshack.us/photo/my-images/822/photo0381p.jpg/
also for the air temp sensor, mine is in the 3000 pipe, between the 2 pcv vents, which is where the original manual says to place it http://imageshack.us/photo/my-images/97/photo0338d.jpg/
mine i drilled the hole a lil to high and the pcv pipe doesnt bolt down anymore, so mark the hole and drill and tap with the pcv pipe bolted on.
just ignore the wires for the vpc, as for the pressue sensor, i added mine by the vac t by the brake booster, that run to the crusie and stock boost sensor. pic here http://imageshack.us/photo/my-images/822/photo0381p.jpg/
also for the air temp sensor, mine is in the 3000 pipe, between the 2 pcv vents, which is where the original manual says to place it http://imageshack.us/photo/my-images/97/photo0338d.jpg/
mine i drilled the hole a lil to high and the pcv pipe doesnt bolt down anymore, so mark the hole and drill and tap with the pcv pipe bolted on.