bxiong17;1943488 said:
was browsing on the neo and accidently initialized and clicked yes and this reset all my settings.. what air flow sensor type should it be? BryanDyer, give me your numbers and see if it would at least get it running so i can drive it to a shop to get it retuned. i didn't think toyota dealership offer tuning..
Upon reinialtization this is how things should go:
Re-inilaize....
Step 1:Select VTEC control..(
You will select OFF)
Step 2:Select EASY or PRO...(
Select PRO)
Step 3:Select number of cylinders...(
Enter 6)
Step 4:Select throttle sensor Characteristic, or "Thr".... (
Choose the arrow pointing to the right and up)
Step 5:Set the throttle CLOSED....(
Don't touch the gas pedal, and push OK)
Step 6:Set the throttle OPEN......(
While holding the throttle all the way to the floor, push OK)
Step 7:Select the air flow sensor.....(
Choose KARMEN)
Step 8:Start the car to finalize the settings.
At this point the car should start and run. Get the car to a tuner for a proper setting before you drive it to much.