Sheedy Built Supra

[IndigoMKII]

Stock pressure plate and I believe its a heavy duty aisin clutch. Not much better than stock

Sent from my PC36100 using Tapatalk 2

Same setup I'm using. I wondered when it would start to slip, cause it hasn't slipped on my current setup yet.

 

[sheedy126]

Wrapped my gauge cluster bezel sp* today.
Turned out pretty good

Sent from my PC36100 using Tapatalk 2

 

[sheedy126]

My door panels were pretty bad so I added a little fiberglass reinforcement where your arm rests.

I also took the carpet out and added Swede to the panels. I've never done this before but I thought it turned out pretty good.

Just got the passenger panel done for now

Sent from my PC36100 using Tapatalk 2

 

[sheedy126]

Finished product



Sent from my PC36100 using Tapatalk 2

 

[Jetpower]

Nice build!

 

[1986.5supra_kid]

so how does it run? are you happy?

 

[mkiiibro]

what are your specs on your oil lines? Just picked up an hx40, trying to figure out where to buy my oil lines.

 

[IndigoMKII]

-4 feed with a -10 return would be best. Just remember to make the return as straight as possible.

 

[sheedy126]

im running -4 feed and -10 return like indigo said.
i purchase all of my fittings and lines from siliconeintakes.com, they have really low prices and good quality parts.

still saving for a clutch but the car runs great, especially in this cold weather

 

[IndigoMKII]

still in for that dyno. I am having an inner battle with myself about my hx. I need to purchase another turbine housing for it and its around 280 all said and done. I am considering just putting that towards a hx40 that already has a t4 footprint. oh damn these decisions.

 

[sheedy126]

Act stage 4 clutch and extreme pressure plate came in from drift motion!
Time to throw this bad boy in, break it in, and head to the dyno!

Sent from my PC36100 using Tapatalk 2

 

[1986.5supra_kid]

Hurry up lol

 

[suprafreak123]

Niceeeeeee Supraaaaaaaa!!!!!!

 

[sheedy126]

Niceeeeeee Supraaaaaaaa!!!!!!

Thanks!

Got the transmission pulled and flywheel resurfaced ready to be put in with the new clutch and pressure plate. I also got a viper 5704v alarm system in getting installed this week.
Also got a turbo blanket that actually fits

Sent from my PC36100 using Tapatalk 2

 

[sheedy126]

Picked up some exhaust parts as well all v band

Sent from my PC36100 using Tapatalk 2

 

[atmperformance]

vband test pipe?

 

[1986.5supra_kid]

I'm doing clutch change too. Must be that time of the year.

 

[sheedy126]

vband test pipe?

I'm actually doing a v band setup that connects at under the differential so I can either run my muffler, or straight pipe

I'm not running any cats or anything, straight pipe to small glass pack, then hks hi-power muffler

Similar to the picture below but being able to run my muffler as well

Sent from my PC36100 using Tapatalk 2

 

[sheedy126]

More goodies

Sent from my PC36100 using Tapatalk 2

 

[sheedy126]

Clutch and transmission are back in ready to get broke in. Oil and filter changed and ready to go.

These fumoto drain plugs really make changing oil a breeze!

Sent from my PC36100 using Tapatalk 2