Ryan's 92 build thread aka NashMan

NashMan

WTF did he just wright ?
Aug 5, 2005
4,940
17
38
42
Victoria BC
oh ya i ended up breaking it in with boost but only 8 to 10 pounds


i plain forgot about my wide band being down stream hahahah
 

NashMan

WTF did he just wright ?
Aug 5, 2005
4,940
17
38
42
Victoria BC
IndigoMKII;1735709 said:
Do you have a trick to getting that heat wrap to stick so well?


yes there is away to make is stick like it is steel wrap


what ya need is heat gun or gf's hair dryer heat guns works the best thou


the trick is to wet the wrap then use the gun to heat it so it shrinks and tightens to the pipe

stick heat gun in pipe then watch it strink from the heat


that pretty much about it
 

NashMan

WTF did he just wright ?
Aug 5, 2005
4,940
17
38
42
Victoria BC
Well Since my old ported head was destroy from lean out Grrrrrrrrrrr

I got my self a new head to play with 92 casting as well

and some well pictures of group A heads porting job that I took my self


I figure I will put about 20 plus hours into this head alone and I will have to get custom pistons to boot since so much will be removed


The virgin

p1828860_1.jpg

p1828860_2.jpg
 

NashMan

WTF did he just wright ?
Aug 5, 2005
4,940
17
38
42
Victoria BC
Well I got my head back but now it's time to grind grind grind

p1837340_1.jpg


you can see how much is all ready taken out all ready and have yet to even start lol

Stay tuned
 

crisp

existentialincrementalist
May 25, 2007
1,785
2
38
Ohio
IT'S ALIVE! (Well... it's OWNER is, anyway!:biglaugh:)


Keep us posted, Ryan! Looking forward to hear you get this fired and on the road again...


-crisp
 

NashMan

WTF did he just wright ?
Aug 5, 2005
4,940
17
38
42
Victoria BC
I figuring how my life is going she will be ready for spring test and tune

and going to change some stuff around mabye get a newer turbo or run quick spool vavle I want spool back like I had on my 68 housieng



but for now it's head time
 

NashMan

WTF did he just wright ?
Aug 5, 2005
4,940
17
38
42
Victoria BC
well did some work today

turning out pretty good I must say

now just have to ummm do some more fine tuning then cc the camber's and order my custom pistons :)
p1837613_1.jpg

p1837613_2.jpg



this time around I am going to be running solid bucket as well

still debating about getting bigger valves but we will see
 

NashMan

WTF did he just wright ?
Aug 5, 2005
4,940
17
38
42
Victoria BC
Well fished roughing the chambers now I just have to do the finale chamber cleaning and matching and I will be good to go I may knock some more off the sides but we will see

p1838374_1.jpg


close up

p1838374_2.jpg

p1838374_3.jpg
 

NashMan

WTF did he just wright ?
Aug 5, 2005
4,940
17
38
42
Victoria BC
Well I whip out the big slab of meat today and started to work on one of the chamber's It's really close to being done.
All I have to do is cc it then call up JE and get me some pistons made up

p1919310_1.jpg



the plans for the head are

stock size 2jz vavles
thermo coat the chambers
re grind my bc 272 cam's since the 2jz valve's are longer "maybe"
solid buckets
plop my old BC tie springs and retainers


ps Toby my truck rules
 

planemos

New Member
Apr 22, 2011
559
0
0
Slocan Park, BC, Canada
hahaha nice. It's probably because the trucks are always alive and drive-able. I know because that's how it is for me too. My Supra is being worked on and my truck is always running.