Rings Gap.....

[mekanyx]

I just buy some Probes Forges Piston .0040mm oversize one, for my 7M-GTE, I just recived my stuff for the machine shop but they lost the sheet with the ring end gap.....

So I need ya help to get the ring end gap of the 1st,2sec and oil ring

tankx a lot for ya help

 

[IJ.]

Rough rule of the thumb is 4 thou per inch of bore diameter 1st ring and 5 thou per inch for the 2nd ring.

For high output/boost motors I add a thou to the end numbers to prevent it closing an end gap.

 

[mekanyx]

Rough rule of the thumb is 4 thou per inch of bore diameter 1st ring and 5 thou per inch for the 2nd ring.

For high output/boost motors I add a thou to the end numbers to prevent it closing an end gap.

You got Probes Piston in ya GTE....

 

[Mr. Y]

here ya go:
http://www.supramania.com/forums/showthread.php?t=53469

 

[mekanyx]

Tankx alot guys I finf what I want with ya help tankx again guys

Close Topic Please