Is it possible / worth the effort to recalibrate the stock boost gauge to show a higher boost reading? I did a search for "recalibrate guage" and nothing was found. I am thinking it would be relatively simple to create a new face that could show the higher number if the gauge could be adjusted.
Recalibrate stock boost gauge to read higher
- Thread starter KMinAF
- Start date
Imo it wouldnt be worth your time since it only goes to -4 also. Be much easier to find either a better looking aftermarket or a stock looking aftermarket gauge.
TRD, a long time ago, sold one to 16 psi. I have never seen it in person, or for sale on ebay and other types. I only read about it.
Not difficult. Search more and you'll find how. Whether it'd be "worth the effort" is something you'll have to decide.
More trouble than its worth imo... but its pretty doable
Find out the range the stock meter works at with a meter.Or you could hook up a voltage generator in place of the stock pressure sensor and find it out that way.
Once you know what it takes to make the boost gauge do a full sweep you can pick a sensor for what ever you want the range to be.
Find out the range the stock meter works at with a meter.Or you could hook up a voltage generator in place of the stock pressure sensor and find it out that way.
Once you know what it takes to make the boost gauge do a full sweep you can pick a sensor for what ever you want the range to be.