Power Seats

[Jayhall]

Ok, heres my deal. car has got no motor in it. Im replacing the full interior, but my drivers seat is back as far as it can go (im very tall) and theres no power, so i cant move the seat forward to get at the rear mounting bolts. Anyone have any ideas?

 

[CRE]

Power the harness with a battery and move the seat.

 

[Jayhall]

the body harness? or the seat harness, becasue i actually think the ground cable was taken off with the motor

 

[CRE]

Just the seat harness. Look in the TEWD to find out specifically which wires you need to apply power to.

 

[Jayhall]

what does TEWD stand for?::dunce:: toyota *E* wiring diagram?

 

[CRE]

Don't have mine here to look at, but I think it's "Toyota Electrical and Wiring Diagrams".

 

[shaeff]

you can power it through the lumbar/side support switch.

+ = blue wire with silver dots

- = white wire with a black stripe, and silver dots.

-shaeff

 

[Poodles]

if you still have the positive cable in the engine bay, all it takes is a kumper cable from the negative battery post to the frame to get power...

 

[Jayhall]

thank you for the info guys!

 

[shaeff]

welcome.

-shaeff