poly subframe bushings kit

ronniek

Authorized Vendor
May 2, 2005
274
0
0
auckland
Beals;2094271 said:
Do you offer these sets in a rigid collar? I'd be interested since your steering rack bushings were nice
I do not offer collars,just a direct bush replacement.
black bushes I make are harder than red ones if you are after stiffer bushes
 

HKS_TRD

Active Member
Jul 21, 2007
1,098
0
36
Australia
Ronnie, do you make a bush which fits the LIPP/Suprasport stainless traction arm?
On that note does it take the same bush as the standard traction arm?
 

HKS_TRD

Active Member
Jul 21, 2007
1,098
0
36
Australia
I need red bushes for the camber arms and also the traction arm/strut rod if it can be confirmed they fit the suprasport/lipp arms. From a quick measurement it seems the OD for the bush in the lipp arm is 37mm is that what the bush you make for the standard arm is?
 

ronniek

Authorized Vendor
May 2, 2005
274
0
0
auckland
I used to make poly bushes for suprasport strut rod.hopefully arms haven't changed and my bushes shouldn't fit but will have to confirm that



HKS_TRD;2095621 said:
I need red bushes for the camber arms and also the traction arm/strut rod if it can be confirmed they fit the suprasport/lipp arms. From a quick measurement it seems the OD for the bush in the lipp arm is 37mm is that what the bush you make for the standard arm is?
 

HKS_TRD

Active Member
Jul 21, 2007
1,098
0
36
Australia
ronniek;2095627 said:
I used to make poly bushes for suprasport strut rod.hopefully arms haven't changed and my bushes shouldn't fit but will have to confirm that

I doubt the design of the arm would have changed, was the bush you made for them different to the bush for the standard arm?
I bought mine years ago and installed them but haven't driven the car yet.
When I removed them to swap to a strengthened subframe I discovered the bushes had gone brittle and the outer face crumbled off. These bushes are green so I don't think they are ones you made.
I don't think the arms are in production anymore
 

ronniek

Authorized Vendor
May 2, 2005
274
0
0
auckland
The bushes were same as standard arm bushes.all the suspension arms I made back then were red only.
Maybe suprasport were to different supplier cos I have supplied bushes to them for years.

QUOTE=HKS_TRD;2095628]I doubt the design of the arm would have changed, was the bush you made for them different to the bush for the standard arm?
I bought mine years ago and installed them but haven't driven the car yet.
When I removed them to swap to a strengthened subframe I discovered the bushes had gone brittle and the outer face crumbled off. These bushes are green so I don't think they are ones you made.
I don't think the arms are in production anymore[/QUOTE]
 

ronniek

Authorized Vendor
May 2, 2005
274
0
0
auckland
Sorry,meant to say I haven't supplied for years.
ronniek;2095644 said:
The bushes were same as standard arm bushes.all the suspension arms I made back then were red only.
Maybe suprasport were to different supplier cos I have supplied bushes to them for years.

QUOTE=HKS_TRD;2095628]I doubt the design of the arm would have changed, was the bush you made for them different to the bush for the standard arm?
I bought mine years ago and installed them but haven't driven the car yet.
When I removed them to swap to a strengthened subframe I discovered the bushes had gone brittle and the outer face crumbled off. These bushes are green so I don't think they are ones you made.
I don't think the arms are in production anymore
[/QUOTE]
 

HKS_TRD

Active Member
Jul 21, 2007
1,098
0
36
Australia
Thanks Ronnie
Going to a different supplier was a bit of a fail on their part it seems based on my experience.
If you want to follow up via PM I'd like to order bushes for the suprasport traction rods anf bushes for the camber arms, all in red.
BTW I just installed the rear subframe bushes I bought from you this week, everything fit great making for an easy job ��