Hi Guys,
Ok ever since I did my 1J swap on my Supra I never installed the cruise control unit untill a few days ago.
The car is a 1986.5 MA70 which had a 7M-GE manual with W58
and now has a 1JZ-GTE from a 1990 JZA70
Here's my original thread on sfau http://www.supraforums.com.au/forum/a70-mkiii-discussion/86015-no-cruise-control-after-1j-swap.html
So far I've completed test A and Test B outlined on page BE-63 of the TSRM which indicates everything is apparently working normally.
I've attempted to depin the black/white wire (pin 11) however I believe the instructions on doing that were for 1990-92 models. My plug had no black/white wire and I simply counted to pin 11 and removed it with no success.
Only thing I can thing of is do I need a check valve for the vac line that goes to the cruise control unit?
Any help would be appreciated.
Cheers,
Benjamin
Ok ever since I did my 1J swap on my Supra I never installed the cruise control unit untill a few days ago.
The car is a 1986.5 MA70 which had a 7M-GE manual with W58
and now has a 1JZ-GTE from a 1990 JZA70
Here's my original thread on sfau http://www.supraforums.com.au/forum/a70-mkiii-discussion/86015-no-cruise-control-after-1j-swap.html
So far I've completed test A and Test B outlined on page BE-63 of the TSRM which indicates everything is apparently working normally.
I've attempted to depin the black/white wire (pin 11) however I believe the instructions on doing that were for 1990-92 models. My plug had no black/white wire and I simply counted to pin 11 and removed it with no success.
Only thing I can thing of is do I need a check valve for the vac line that goes to the cruise control unit?
Any help would be appreciated.
Cheers,
Benjamin