new to the 7m world

boosted89cressy

New Member
Jul 18, 2010
3
0
0
san jose california
Hey guys I'm new to the 7m did a 7mgte swap ecu and 5 speed in my cressida. Blew the head gasket. Now everythings almost back on anyone in northern cali mind comin down to help out with the vacuum deleteing the egr and wiring back together? I am in the south bay ill pay for gas if needed.

Thanks guys
 

89supra7mgte

New Member
Sep 20, 2009
797
0
0
colorado
Deleting the egr is not gonna help you if thats why you are doing it? search on this post for vacuum line routing and i think someone has all the egr lines highlighted. But removing will not gain performance
 

hvyman

Dang Dude! No Way Man.
Staff member
Apr 17, 2007
12,568
1
38
Fullerton,CA
Not a good way to start.

Leave the engine alone until you know what the part does and whats going to be effected by taking it off.
 

boosted89cressy

New Member
Jul 18, 2010
3
0
0
san jose california
The problem was when I got the car with the 7mgte in it none of the vaccum was even hooked up properly. It didn't have 90 percent of any lines going anywhere. So I said screw it and deleted everything that wasn't hooked up whoever did the first swap initially did a real hack job
 

89supra7mgte

New Member
Sep 20, 2009
797
0
0
colorado
The tsrm will chow you vac line diagram. I would recommend hooking it all up properly before deleting anything. would be more efficient if it were done right.
 

89supra7mgte

New Member
Sep 20, 2009
797
0
0
colorado
if thats the case then dont even worry about post it and sell it as is. but deleting everything isnt gonna make any ease for running. better off just buying some vac line and routing where it needs to go, i believe most of the are all the same size.