Need help identifying a fitting on my FFIM

Mo87NA

1987 7M-GE & 1991 7M-GTE
Mar 31, 2005
778
8
18
38
Upstate NY
I posted this in my build thread, but I figured I would have more luck here.

The manifold is a Ron R. unit with an ISC provision. There is a welded AN fitting beneath the 'HKS' elbow which has got me stumped (right before the throttle body). I have no idea what it's for. It sits right above the alternator so I doublt I'll be able to utilize it anyway.

Any ideas?

p1905766_1.jpeg


p1905766_2.jpeg
 

Mo87NA

1987 7M-GE & 1991 7M-GTE
Mar 31, 2005
778
8
18
38
Upstate NY
That's what I was thinking, but I'm not positive.

Maybe someone with the same set-up will chime in.
 

Mo87NA

1987 7M-GE & 1991 7M-GTE
Mar 31, 2005
778
8
18
38
Upstate NY
Could be, but the idle up for the power steering is a pretty small line. This fitting is at least a -6.
 

Poodles

I play with fire
Jul 22, 2006
16,757
0
0
43
Fort Worth, TX
Usually, that's used to hook up the a vacuum manifold for items that need vacuum (the stock setup uses a fitting on the front of the intake manifold)
 

Mo87NA

1987 7M-GE & 1991 7M-GTE
Mar 31, 2005
778
8
18
38
Upstate NY
Thanks, Poodles.

There honestly is not much room between the fitting and the alternator as you can see from the picture. Theoretically speaking, I could use that fitting to connect a vacuum block for additional vacuum sources correct?