Name the wire?

[iwannadie]

ok, im putting my motor back together after bhg and cant find a wire. on the intact side under the intake. it comes out of the same bundle as the starter terminal 50 wire. its square has 4 connections seems green or clearish green.

i cannot see where this wire goes.

87 na at

 

[IJ.]

Eric!

 

[iwannadie]

it looks like the wires going into the connector are red,yellow, blue, blue/white.

 

[IJ.]

Is there a matching connector on the AT?

 

[DaSuprawolf]

Does it look like this?? if so, after my rebuild i had the same problem, never plugged it in and no problems.

i believe its for emissions in cali.

http://www.supramania.com/forums/attachment.php?attachmentid=7301&d=1149273789
Click image for larger version Name: Picture 005.jpg Views: 53 Size: 423.1 KB ID: 7301

 

[iwannadie]

Yup, thats the one. thanks man

 

[DaSuprawolf]

yea dont even worry about it, let me know how she runs when your done.

your very welcome.

 

[iwannadie]

Well considering this is as far as ive ever torn into Any motor, im not expecting a smooth start up lol.

im pretty sure im going to have to pull the entake back off. i wasnt 100% on the injector wire order so thats 1 possible problem. also, any other random wires under the in take i might have missed will pop up.

i am hopefull it will fire right up ))

 

[DaSuprawolf]

well i found a black wire under the battery too, not a clue where it goes. so its not plugged in too, lol

the hardest part for me on my startup was all the vacume hoses.

and i thought the injector wires only reached to their plug, not hard to mess up?

 

[iwannadie]

well i found a black wire under the battery too, not a clue where it goes. so its not plugged in too, lol

the hardest part for me on my startup was all the vacume hoses.

and i thought the injector wires only reached to their plug, not hard to mess up?

i saw that same black wire at first i was freaked i missed a plug. i remembered reading about it awhile back so i just left it.

the injecter wires will reach kinda far for me. the harness seems original never messed with(cut). the first injector i can plug 2 different wires into. the middle ones are pretty much 1 wire, the last injector can have 2 reach it.

sadly, i got it all bolted up and it wont start. it cranks but wont fire, gotta start looking for whatever the cause is tomorrow :cry:

 

[supramacist]

switch 1 and 2.

 

[iwannadie]

switch 1 and 2.

i think its a timing issue, i found another thread and 2 people had the exact same problem(i think). turned out it was just the timing, id still like someone to get a pic or check the wire colors of the injectors though?

http://www.supramania.com/forums/showthread.php?t=28024&highlight=start

 

[CRE]

The injector plugs are color coded, they alternate. I'll check in a few minutes which color #1 is.

 

[iwannadie]

The injector plugs are color coded, they alternate. I'll check in a few minutes which color #1 is.

my plugs are all white, the wires going into the plugs are different, 2 sets of 3 it looked like.

 

[CRE]

my plugs are all white, the wires going into the plugs are different, 2 sets of 3 it looked like.

Really? Huh, I was under the impression that at least the pre89's all had the alternating colored clips. My harness has one set of 3 white clips and one set of 3 brown clips. I just checked, the wires running to my clips are not colored in such a way that that they appeard to be colored in a specific grouping.... they might be, I only took a quick look, but I wasn't left with that impression.

 

[CRE]

Okay, nevermind on my wires not being color coded, I'm looking in my '88 TEWD and I recognize the colors. They are as follows: #1 and #4 - White/Blue and Yellow; #2 and #6 - White/Red and Black; #3 and #5 - White and Red.

I hope this helps.

 

[iwannadie]

Okay, nevermind on my wires not being color coded, I'm looking in my '88 TEWD and I recognize the colors. They are as follows: #1 and #4 - White/Blue and Yellow; #2 and #6 - White/Red and Black; #3 and #5 - White and Red.

I hope this helps.

Thanks, ill check mine tomorrow to see if they match yours.

 

[iwannadie]

well turned out my 5 and 6 were mixxed so im glad i did check. still wont start. gotta be a timing issue, ill search timing and hopefully get it going