msimsi10's 7MGTE build-up

[msimsi10]

I started this back in August of '09 so its going to be a bit of an update. Here is my intro if you wanna see the back ground info. My goals are [STRIKE]450-500hp[/STRIKE] and but i wanted to build it so I could push a lot more out of it later :naughty:
Well that time is now my new goal is 600HP and nothing less!
NEW!
LED Tail Lights Starting on page 4
Video Page 7
Here are all the pics of my Supra build if interested

1988 Toyota Supra
List of Mods

-Turbo
T61 CXRacing

-Bottom End
Wiesco Pistons, Eagle connecting rods, 2mm MHG, ARP head studs to 85 ft lbs.

-Head
New valve job, other than that, stock head

-Intake
Stock intake manifold, Running Turbo XS Type H-RFL BOV, Godspeed intercooler kit (2.5 inch piping)

-Exhaust
HKS Dragger Exhaust (3.5&#8221 and HKS Downpipe (3&#8221

-Fuel
Walbro 255 pump, Aeromotive FPR

-Rebuilt transmission with Martin Crawler parts

-Spec Stage 3 clutch

-1 piece driveshaft driveshaft shop

-Suspension
Zankoku Coilover

-Brakes
Slotted rotors

-Electronics
HKS VPC, Apexi Neo AFC, Greddy Profec B spec 2

-Other
Godspeed Aluminum Radiator

I only blew my HG a little bit lol

Always make sure to make a clean pull out :biglaugh:

 

[msimsi10]

Dirty ass engine with my super expensive tool box in the back ground haha

It always feel like Christmas when packages come

After the machine work and cleaning

out with the old

in with the new

 

[SURUKO]

looking good nice colection of parts keep up the good work

 

[msimsi10]

looking good nice collection of parts keep up the good work

Thanks it has been quite a learning experience and all of y'all on the forum have really helped out this site is the greatest resource to have when owning one of these cars.

 

[ohiosupramst]

Please tell me a wideband and 550's are in order.

 

[msimsi10]

Please tell me a wideband and 550's are in order.

Yes they are the VPC has the 550cc chip but i figure I cant get away with running it till I break it in on stock injectors with a wideband and using the stock afm

 

[msimsi10]

Apexi neo and Greddy Spec B

VPC in the glove box Im planning in Painting the diamond plate black

 

[msimsi10]

Valve covers polished trim and PSP reservoir Polished cap

 

[akito]

hmmmm clean build!!! keep it up! no plans for the body of the car?

 

[msimsi10]

hmmmm clean build!!! keep it up! no plans for the body of the car?

some time i would like to get it repainted and some wheels but that is about it I like the stock/sleeper look

 

[msimsi10]

Got my head back from the machine shop today!

 

[dubsupra209]

damn clean build..how much did it cost in total did it cost at the machine shop....?

 

[kamikazemkiii]

Bottom end looks just like mine, i wouldnt use the lex afm without injectors.

 

[msimsi10]

damn clean build..how much did it cost in total did it cost at the machine shop....?

$225.75 included a 3 angle valve job, milled it flat and cleaned it like new

Bottom end looks just like mine, i wouldnt use the lex afm without injectors.

Im going to sell the Lex afm because i picked up a HKS VPC but im going to get the suprasport 550cc injectors :biglaugh:

 

[msimsi10]

The engine is finally back in the car and all put back together. After 27 hours of workin on the damn thing well get to crank her up tomorrow and hope she runs!!

 

[Kevin]

niiceee build man. very clean

 

[msimsi10]

I finally got it running pics to follow sometime!

 

[msimsi10]

Here are some pics

Of course Sponsored By Bud Light!

 

[88supramaniac]

nice...











more pics

 

[msimsi10]

Its a lil dirty I had a coolant leak earlier

The First Page has a like to my album in red at the top