i know the Auto is 3 piece and manual is 2 piece, so can i use the upper piece from an Auto and the lower piece from a manual and it will work???? or what??? need my speedo working ASAP
can i attach an upper auto speedo cable to the lower 5spd cable and it will work????? i thought i explained it pretty clear.....
the upper piece from the back of the speedo gauge to a foot from tranny will be from an auto then the the last 15 inches or so will be that of a 5spd manual speedo cable
Honestly, I'm not sure. I'd assume if they connected correctly it would work. When I did the 5speed swap I just re-used my auto cable. The cable only takes around 10 minutes to put on(once you yank the gauge cluster, another 10 minutes of work), you should just try and see if it works.
I don't really know, but I think I may still have my old upper speedo cable (manual) from when my lower part broke laying around, I'll have to check (I bought a full cable off of Chriso).
What I'm saying is, If I can find my upper manual cable we can work something out by getting it to you if your combo doesn't work. You are using the 5spd lower half and going to a manual tranny right?
on the auto cable, remove the very last piece that goes into the tranny and is all metal and curved. now you have the 2 piece 5speed cable. easy enough.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.