JDM charcoal cansiter...

[Oppie1]

Looks like the small bottom port goes to the VSV, the other one next to it goes to the tank (i think). Anyone know where the top port goes? Intake tube? hmmmm...

Excuse the crude MS pain pic and the long vacuum lines, which will be trimmed to fit when I figure out where to mount it:



Thanks in advance!

 

[hvyman]

1 goes to the tank.
1 goes to the bsvs or tb port
1 gets vented. Think the top one goes to the tank. not sure tho

 

[Oppie1]

1 goes to the tank.
1 goes to the bsvs or tb port
1 gets vented. Think the top one goes to the tank. not sure tho

Just matching up the fittings, the small one on the bottom has to go to the tb port/vsv. The top port is slightly larger than the bottom one, but it seems that the bottom one is the same size as the pipe coming from the tank, but it could be the top one.

Thank for your input. Can any one else confirm?

Thanks,
Ryan

 

[scotty]

Sure it's JDM? JDMs weren't delivered with the charcoal canister?

 

[martin p]

Sure it's JDM? JDMs weren't delivered with the charcoal canister?

All 3 of my jdm spec cars had them, As will my 1jz when it goes in.

 

[RazoE]

I have a JDM one, wondering how it's routed as well. Looks upside down to me as the stocker has a port on the bottom that goes to the tank

 

[Oppie1]

Should be from a a JZA70 I thought...

---------- Post added at 05:31 PM ---------- Previous post was at 05:30 PM ----------

I have a JDM one, wondering how it's routed as well. Looks upside down to me as the stocker has a port on the bottom that goes to the tank

Yea, it might be upside down. Someone on here has to be running one of these that can tell us!

 

[martin p]

I have a JDM one, wondering how it's routed as well. Looks upside down to me as the stocker has a port on the bottom that goes to the tank

Should be from a a JZA70 I thought...

---------- Post added at 05:31 PM ---------- Previous post was at 05:30 PM ----------




Yea, it might be upside down. Someone on here has to be running one of these that can tell us!

I will check tomorrow for you both, As it's dark now in the uk

 

[Oppie1]

I will check tomorrow for you both, As it's dark now in the uk

Thank you!!!

 

[hvyman]

Sure it's JDM? JDMs weren't delivered with the charcoal canister?

All supras have a charcoal canister. jdm supras did not have egr. Completely different system.

 

[Oppie1]

I frogot about this website, which still leaves some questions unanswered. lol.

 

[Oppie1]

Found another diagram on alldatapro, which shows a nice view of the 7m canister, which has to work the same way as the jza70:



I'm not sure where the bottom goes still, but maybe its just a vent that goes to the intake, or just chills there.

 

[toyotanos]

It just kinda chills, open to atmosphere.

 

[MA70AEROTOP]

mines a JDM JZA70 and the bottom port goes to a rubber tube which goes into the cross member at the bottom and the top port comes from tank and the small one goes to a nipple on the 1JZ if I recall throttle body do not put it where you would put the boost gauge line!!

 

[martin p]

mines a JDM JZA70 and the bottom port goes to a rubber tube which goes into the cross member at the bottom and the top port comes from tank and the small one goes to a nipple on the 1JZ if I recall throttle body do not put it where you would put the boost gauge line!!

Yes that is the same as my set up on both my old 1G-GTE and the 1jz.

 

[Oppie1]

Thanks all!!!