I hooked up a SAFC I apexi to the air flow meter signal on the ecu with the pink and orange wires coming from the apexi to the spot it specifies I cut the wires connected it now the car starts and idles fine, but when I press the gas it won't rev up it just wants to stall. So i reconnected the air flow meter wire to stock and it worked fine again what's causing this problem for me I have an 89 Grey plug ECU, Turbo.
Install SAFC apexi I, car stalls on acceleration
- Thread starter Raggan
- Start date
I figured it out I didn't know i had to set the safc to karman vortex in the settings for it to work.
