how to oil new turbo???

[family-supra-turbo's]

Hi,
Just got a new turbo SP61GT, and i was wondering how too oil up/in the turbo before we crank up the car, i don't want to start the car up and the turbo don't have any oil in it(i don't want to seal up the turbo). What can i do the solve this, is there a way we can feed the turbo oil before we crank her up. thanks i know this is rookie question but i know you guys can help out.
thanks again. family-supra-turbo

 

[WhtMa71]

Remove the spark plugs and EFI fuse. Crank over until you get oil pressure, then continue to crank for a min. Make sure not to burn up the starter. Install plugs and EFI fuse and crank it up!

 

[EdT.Mk3]

I primed my turbo when I had it laying around the house by pouring some oil into it, and spinning the compressor wheel by hand slowly while the oil ran itself through. Then I let it sit overnight on top of shop rags.

I read on some forums that people pull their fuel pump relays and let the motor crank over a few times, getting some oil pressure, then let the motor idle for a few minutes on initial startup.

-Ed.T

 

[IJ.]

Remove the spark plugs and EFI fuse. Crank over until you get oil pressure, then continue to crank for a min. Make sure not to burn up the starter. Install plugs and EFI fuse and crank it up!

x2