How do I get rid of....
- Thread starter bigunitpitcher22
- Start date
Drive over to Kyle's place.
See him drive my old car.
Take notes.
Enjoy.
I honestly dont' know what does or doesn't cause it.
I know my old car didn't do it. The only thing from stock that it had was 0 compression drag shocks in the back.
See him drive my old car.
Take notes.
Enjoy.
I honestly dont' know what does or doesn't cause it.
I know my old car didn't do it. The only thing from stock that it had was 0 compression drag shocks in the back.
Yeah let off the gas when it happens 
Ok..LOL You can get solid bushings for the entire subframe and also have spherical rod end bearings instead of rubber throughtout the suspension parts.
Duane
Ok..LOL You can get solid bushings for the entire subframe and also have spherical rod end bearings instead of rubber throughtout the suspension parts.
Duane
well i found out what cause wheels hop these are what i ahve done to slove it
semi solid sub frame bushing's
re infrost track arms
less toe in the rear of the car
none sluppy bushing thou out the rear spetion and such
and to have al less droop as possible int eh rear end cause that is when your alment chnages witch cause it as well
semi solid sub frame bushing's
re infrost track arms
less toe in the rear of the car
none sluppy bushing thou out the rear spetion and such
and to have al less droop as possible int eh rear end cause that is when your alment chnages witch cause it as well
One part of the solution: http://www.suprasport.com/LIPP-Rear-Traction-Arms_p_0-145.html
And another: http://www.suprasport.com/RK-FULL-Poly-Bushing-Kit_p_67-341.html (note: this is a full kit for the entire car).
And possibly some new struts and springs.
And another: http://www.suprasport.com/RK-FULL-Poly-Bushing-Kit_p_67-341.html (note: this is a full kit for the entire car).
And possibly some new struts and springs
.Well as soon as i have some money to burn, this is the first thing thats gonna get done, I hate not being able to spin out correctly
Plus they are a real bitch to put on. I think changing bushing's would make the guru's of HG changing stumble a bit .
.
You'll need to get a press to be able to install them correctly. You may be able to find some place that can loan one of those out...
100 more posts to go!
100 more posts to go!
press fuck that i used my bench vise easy as pie just makes sure they go in stright frist and take some sand paper or die grinder and road the edge's so they go in better and don't for get to add gress nipples
starscream5000 said:
I remember hearing about the special type of lubrication recomended for poly bushings, let me see if I can find it again............. Ah, here it is: http://www.energysuspensionparts.com/proddetail.asp?prod=9.11104&cat=3436
Here's something else that's suppost to help wheel hop: http://www.supramania.com/forums/showthread.php?t=24414
And here: http://www.supramania.com/forums/showthread.php?t=7055&page=5
I'm trying to get my hands on this kit.
And here: http://www.supramania.com/forums/showthread.php?t=7055&page=5
I'm trying to get my hands on this kit
.