Hey guys, i recently purchased a "Universal SSQV" for my jza70 supra. I was just wondering what i would need to install this on my car. I dont know if i need to purchase any other parts, or if any welder could just weld this on without anything special. Let me know thanks. (The instructions werent even in english so i cant even go off that lol)
HKS SSQV Flange?
- Thread starter One Jay Z
- Start date
Just get your self an upper IC pipe and bring the flange and pipe to a welding or muffler shop and ask them to weld it up for you.
Ok that somewhat answered my question.. Is there anything else i'd need to know. The whole manual is in japanese as i said before and its impossible to read for me lol. What do i need to do for the tubing etc? I want it to run @ a fairly normal idle.
Any turbo performance shop will know exactly how to set this up... you'll need a couple caps to plug the stock BPV routing, and just use that signal on the HKS. If you can weld it yourself, we could dig out a parts list for the pipes with some searching, I figure, but if not, just let the shop deal with it.
Recirc for stock. You could vent it, but you'll go super rich on shifts, possibly to the stalling point.
Good thing Joe keeps me in line with the 1J threads! He's right, of course, I was thinking of the 7M engines.
