Ok I wanted hids in my supra so I went ahead and made some orders for my project I was asked to make a thread for this so here you go
What you need (what I used)
eBay h1/h4 projectors. 50 bucks
7x6 eBay headlights. 25.00
H4 hids. I used eBay junk ones just for test. I'm getting some nice ddm or other hid. 30 bucks
Epoxy,silicon/glue,and gas. 15 bucks
****** Never Put hids in housing without projector u will blind people with the glare... Do it right
Step one
I had glass headlights from eBay so I put them in gas for a day and they split right apart for plastic light lens use a oven to separate
Step two
Trim the back of the headlight housing and epoxy on new type of backing to it. I used large Thick piece of plastic
![ImageUploadedByTapatalk1369017715.908997.jpg ImageUploadedByTapatalk1369017715.908997.jpg](https://www.supramania.com/data/attachments/40/40749-a0e5a488429f16ce8d918189a37e182b.jpg)
Step three
cut a whole in the backing so the projector will fit in and place in projector
![ImageUploadedByTapatalk1369017811.131963.jpg ImageUploadedByTapatalk1369017811.131963.jpg](https://www.supramania.com/data/attachments/40/40750-e160703d081f49b86c0496b478827906.jpg)
Step four
secure projector with something mine had 4 mounting holes so put 4 self tappers or screws in them
Step five
Put the lenses back on with some type of sealant/glue and let them sit over night
![ImageUploadedByTapatalk1369017986.539876.jpg ImageUploadedByTapatalk1369017986.539876.jpg](https://www.supramania.com/data/attachments/40/40751-1840679bef84a39b02e7c7cffc1f9512.jpg)
I haven't put them in the car yet but I tested these cheap eBay projectors
![ImageUploadedByTapatalk1369018106.150292.jpg ImageUploadedByTapatalk1369018106.150292.jpg](https://www.supramania.com/data/attachments/40/40752-3bdaec9b8f2d2ca0541055990bb59f6b.jpg)
Cut off seems to be good. You may need to trim headlight retractor housing for the projectors to fit
I will be updating when I get them on car should me tomorrow night
What you need (what I used)
eBay h1/h4 projectors. 50 bucks
7x6 eBay headlights. 25.00
H4 hids. I used eBay junk ones just for test. I'm getting some nice ddm or other hid. 30 bucks
Epoxy,silicon/glue,and gas. 15 bucks
****** Never Put hids in housing without projector u will blind people with the glare... Do it right
Step one
I had glass headlights from eBay so I put them in gas for a day and they split right apart for plastic light lens use a oven to separate
Step two
Trim the back of the headlight housing and epoxy on new type of backing to it. I used large Thick piece of plastic
![ImageUploadedByTapatalk1369017715.908997.jpg ImageUploadedByTapatalk1369017715.908997.jpg](https://www.supramania.com/data/attachments/40/40749-a0e5a488429f16ce8d918189a37e182b.jpg)
Step three
cut a whole in the backing so the projector will fit in and place in projector
![ImageUploadedByTapatalk1369017811.131963.jpg ImageUploadedByTapatalk1369017811.131963.jpg](https://www.supramania.com/data/attachments/40/40750-e160703d081f49b86c0496b478827906.jpg)
Step four
secure projector with something mine had 4 mounting holes so put 4 self tappers or screws in them
Step five
Put the lenses back on with some type of sealant/glue and let them sit over night
![ImageUploadedByTapatalk1369017986.539876.jpg ImageUploadedByTapatalk1369017986.539876.jpg](https://www.supramania.com/data/attachments/40/40751-1840679bef84a39b02e7c7cffc1f9512.jpg)
I haven't put them in the car yet but I tested these cheap eBay projectors
![ImageUploadedByTapatalk1369018106.150292.jpg ImageUploadedByTapatalk1369018106.150292.jpg](https://www.supramania.com/data/attachments/40/40752-3bdaec9b8f2d2ca0541055990bb59f6b.jpg)
Cut off seems to be good. You may need to trim headlight retractor housing for the projectors to fit
I will be updating when I get them on car should me tomorrow night