HELP ASAP!
- Thread starter huntin5L
- Start date
Valve-Bimetal switch, for emmissions.
Dealer part, although someone around here might have a good one thats not old and dry rotted.
I bought one as well, #90925-05068
Its actually not "essential" and you can do without it until you get the part.
Dealer part, although someone around here might have a good one thats not old and dry rotted.
I bought one as well, #90925-05068
Its actually not "essential" and you can do without it until you get the part.
Yes, just make sure there isn't any dirt going in there.
I would plug the hard line on the 3000 pipe.
Like I said its for emissions only, its not an essential part.
Follow the line, it goes to the charcoal canister, then to the gas tank.
I would plug the hard line on the 3000 pipe.
Like I said its for emissions only, its not an essential part.
Follow the line, it goes to the charcoal canister, then to the gas tank.
just connect em to each other.. may not be the way to do it. but thats what mine was like when i got the car
You could do that, but it would be pulling fumes from the gas tank 24/7.
Here is the simple operation of the system if you are curious.
http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=EC&P=6
Here is the simple operation of the system if you are curious.
http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=EC&P=6
try jay marks toyota,you might even get a discount! just buy it new,that way you dont have to worry about replacing it with one that might be as bad as the one you replaced.