Gurley's 92 Teal 2JZ Project

[gurley0916]

Well had to make some sacrifices financially to keep the car so I sold the fuel lines, my new centerforce clutch and my tires. So the car is currently on polished sawblades at the moment. Last week my map sensor took a dump so the car has been sitting. Im going to be picking up a MAP-ECU monday to solve the issue as the MAP-ECU bypasses the stock map sensor. They are the same price but with this I can turn the boost up to 18psi and leave it.

Pretty much had to take 2 steps backwards on the build to keep the car but its worth it if it means keeping the car...

Also did the foglight rewire and installed new coilpack clips that were given to me as mine were all broken and brittle.

 

[clos91T]

Glad to see you keeping the car, it's a beauty. Pretty much what im planing to do with mine.

 

[IBoughtASupra]

Nice job on the coil pack plugs. They all get brittle and broken.

 

[Albert]

Youre Welcome for the coilpack clips =}

 

[gurley0916]

Thanks buddy

 

[Albert]

Hows the Map-Ecu? Vids?

 

[gurley0916]

Runs good Im doing 18psi and the saw blades dont like it to much. No vids yet

 

[IBoughtASupra]

Nice and smart choice to go with the map ECU to tune and replace the stock map.

 

[SupraClaou]

Nice outcome! I like what you did... and I am glad you are keeping this beauty.
2jz single turbo mk3 Supras all the way!

 

[gurley0916]

Pretty much was fustrated with life today so I finished polishing my turbo housing to relieve some anger lol...heres the results

Also turbo blew up again last week so I need to get rid of the cheap center cartridge and get a real garrett one and probably needs a new P trim well see. Regardless car has sat for the past week cause Im leaving for Germany in a week and would rather save the money for the trip than get the turbo fixed. So turbo will be fixed in about 6 weeks, after I get back. Im going for study abroad should be fun...Cant imagine what I would of done to the car with the 5K I spent on the trip :aigo:

 

[IBoughtASupra]

Please update this thread with some German hotties or that 5 grand would be a waste.

 

[gurley0916]

Ha ha ha oh geeze

 

[gurley0916]

Woke up at 6am today and busted out the Valve stem seals...was not as bad as i thought. Here are some pics and I wont know how they do till after I get back from my trip when I get the turbo rebuilt.

Pretty Blue Viton

The old LEAKY BITCHES!!!

 

[sunnysupra]

awesome build

---------- Post added at 12:32 AM ---------- Previous post was at 12:31 AM ----------

nice wire tuck

---------- Post added at 12:32 AM ---------- Previous post was at 12:32 AM ----------

plan to do same myself

 

[MA70 Ed]

nice build. clean car! keep it up man!

 

[jono]

So what else is new?

 

[Albert]

Nothing, Im rebuilding his turbo for him with a new Dry Center section, instead of the shitty ass wet one. and Doing some secret ceramic coating for him =p

 

[Crypton2006]

What is new is he took my torque wrench and didnt bring it back befor he went to germany. Jerk lol

Sent from my SCH-I800 using Tapatalk

 

[gurley0916]

I didnt take your torque wrench

Well Back from my trip got the turbo back with a fresh rebuild and a dry center housing instead of the water one, Also polished the compressor housing and I we put Cryptons wheels on my car to see how it looks. Let me know what you think. Heres some updated pics, nothing to new.

 

[ask92]

Need some better pics of the wheels to give you an opinion, but they look good from the looks of the one picture! How do you like that BOV?