just noticed that the oil pressure gauge is not working, i did a neg and pos test on the sender but no reading..any ideas?
berniek;1358770 said:Take a new oil filter, punch (not drill) a 1/4" hole in the bottom (punching avoids chips). Solder in a piece of 1/4" copper tubing. Run a fuel hose to a 100 PSI gauge. Put the filter on the engine. That will tell you what the true OP is without hassles, upstream of the filter element. Once hot, pressure drop across the element will be small, especially at idle.
BernieK
hvyman;1913533 said:Could just use an actual oil pressure testing gauge....