I have a JDM 2jz-gte swapped with 96+ mk4 motor mounts. The fan Clutch is from an SC300 along with the blade. When i test fitted the clutch it seems like it didn't fit, it would not slide in all the way. What's wrong? Also is one 1 inch of clearance enough? If you spaced the clutch out in your swap so you didn't have to trim the blades, please tell me how you did it or where you got the parts because I'm planning to do the same. I don't want to do a bad job and have an unbalanced fan clutch.
Last edited: