Code 35?

[boosted17]

My check engine light is on and it is giving me a code 35. I have an 89 supra turbo 5spd swap. In the manual it says this is the Hac sensor signal. From searching on here it I have found out that this is in the ecu. My question is how do I fix this error code? Is there a sensor that reads the HAC? :1zhelp:

Thanks

 

[suprahero]

http://www.cygnusx1.net/Supra/TechTips/engine_error_codes.aspx

I didn't see a code 35. Good luck with this and I'm sure someone will chime in later with a good answer.

 

[boosted17]

I know I looked there The code 32 has the same description as what I have for code 35.

 

[boosted17]

Also my car is a auto to 5spd swap. I have am using a auto ecu. I also have a 5spd ecu. Should I swap them out. With this affect my apex neo settings?

 

[T0DA]

Probably should be using the 5speed ecu...

 

[supraracer49]

5 spd. with auto ecu is a no no. auto with 5 spd is ok. I think or it might be the other way around I forgot

 

[jdub]

You can use an *auto harness* with a 5 speed ECU, but not a *5 speed harness* with an auto ECU. If you have a 5 speed and auto harness, you should be using a 5 speed ECU...the year (same color plugs) has to match.

 

[bountykilla0118]

i am running the auto ecu and harness with a 5speed swap

 

[boosted17]

i am running the auto ecu and harness with a 5speed swap

Are you having any issue's. The previous owner said the car didn't run right with the 5spd ecu.

 

[boosted17]

After hours of looking online I came across this for code 35. It matches what I have in my manual.
http://www.forum.mkiiisupra.net/showthread.php?t=11470
I will look into this so see if it helps and let everybody know.