--------------------------------------------------------------------------------
I keep getting code 34 AFM, Abnormal Turbo Pressure, Intercooler flash up when I am racing the engine and hitting 10 PSI. I have checked the AFM, to me it seems fine, clean no oil, I have taken the electronics part of the AFM off and cleaned the housing and the black peg that sticks out from the electronics housing with a clean rag, the small mirror is clean. I have taken off my stainless intercooler pipework and checked all hoses and couplers for splits, all are fine.
My question is could the intercooler be shot? I assume its made much like a typical radiator, would this be likley to maybe have a small pinhole leak in it? This problem only shows up under high acceleration and boost levels. The wategate is not shimmed and there are no other mods, save induction kit and exhaust. this is driving me nuts. It has only started happening in the last few days.
Any guidance or places to check would be gratefully appreciated.
I keep getting code 34 AFM, Abnormal Turbo Pressure, Intercooler flash up when I am racing the engine and hitting 10 PSI. I have checked the AFM, to me it seems fine, clean no oil, I have taken the electronics part of the AFM off and cleaned the housing and the black peg that sticks out from the electronics housing with a clean rag, the small mirror is clean. I have taken off my stainless intercooler pipework and checked all hoses and couplers for splits, all are fine.
My question is could the intercooler be shot? I assume its made much like a typical radiator, would this be likley to maybe have a small pinhole leak in it? This problem only shows up under high acceleration and boost levels. The wategate is not shimmed and there are no other mods, save induction kit and exhaust. this is driving me nuts. It has only started happening in the last few days.
Any guidance or places to check would be gratefully appreciated.