Camshaft & Oil Pump washers

[Doward]

The washers under the bolts to the camshafts, and the oil pump drive shaft - I need to know the thickness, and width of them.

Don't feel like waiting on Toyota, when I can just get some grade 8 washers from the hardware store

 

[Orion ZyGarian]

But the ones from Toyota are magic and will make it faster!

 

[Zumtizzle]

I'll head out to the garage right now.

This is Camshaft.
4MM thick
30MM wide
10MM Hole

Oil Pump is on the block
4MM Thick
38MM wide.
8MM Hole
Couldn't get the other two.

I used my Vernier.

 

[Doward]

Appreciate it! I'll go 4mm on the oil pump as well

so I need 2 30mm wide, and 1 38mm wide. Awesome. The oil pump shaft bolt is, iirc, 8mm just FYI for anyone that searches this

 

[Zumtizzle]

I did a eyeball comparison on the Oil pump washer and Cam washer lined up side by side on the shaft and it is 4 MM thick.

Just incase someone searches this i edited my post.