hello everyone. I swapped in a JDM 7mge into my car, I am running on Turbo electronics (AFM, CPS, coilpack, igniter....) I am not running a turbo yet. My problem I am sure is in Timing.. I am getting spark, and fuel, no codes are being thrown. when I crank the motor it will sometimes "backfire" out the intake side, like its pre detonating, or is timed 180 out... I set cam tick marks to the top center marks, set the crank to 0, lined up the CPS, and still no go. so I maybe thought it is 180 out,I placed a pencil in cyl #1, than I look down the oil filler hole, and verify I see the cam lobe sticking up, I then turn the crank counter clockwise 120 deg. and back about 30. the crank ends at 0, and the pencil is up at its highest, I then place the CPS back just like Shaeffs post shows how to intall the CPS, and it still shoots flames and smoke from the intake... any ideas? would bad ground on coilpack cause this?