Assembly lube?

[Rennat]

should i put it on BOTH sides of the bearing? Like on the main surface of the block, and then on the main cap surface? or does it only need to be on the bearing surface for start up? i just thought about it today.

Let me know.

 

[IJ.]

NO!

Only on the crank side

 

[Rennat]

thank you!

IJ your like my go to guy!!!!

(i was just going to PM you but i thought everybody should know)


edit: Do you know the torque spec for the eagle rod bolts? eagle is already closed today... =[

 

[suprahero]

NO!

Only on the crank side

I'm pretty sure he know what he's talking about and he's right about 89% of the time........:sarcasm:

 

[suprabad]

NO!

Only on the crank side

The reason is you will screw your clearance's all up. Once the grease melts off of the back of the bearing you'll have waaay to much clearance. Won't be good.

 

[IJ.]

thank you!

IJ your like my go to guy!!!!

(i was just going to PM you but i thought everybody should know)


edit: Do you know the torque spec for the eagle rod bolts? eagle is already closed today... =[

Nope sorry never used a set but I'm sure someone here has the documentation that comes with them