So I got my Stinger and PNP harness used but my car is still in pieces for now so I can not just plug it up to see if it even works BUT I have all of these cut wires...
I was looking at the picture of driftmotions pnp harness and notice there are NO cut wires at all yet on my harness I have a few cut wires and even one exposed end and 2 or 3 heat shrinked ends. What would they be? I have a feeling they are AUX to something or am I suppose to connect them all somewhere? I am unable to find the original owner/ unable to get reply from him so I have no idea. It stresses me out and I am unable to find a diagram telling me what pin is really what. Their website has a manual but it still does not really tell me all the pins.
I also notice on the ecu side there is an unwrapped/shielded wire. Is that correct?
None of the wires seem to have ever came from the pin harness plug unless someone did a bad ass yanking clean job on it
I was hoping a simple plug and play and since I found a used one for a good deal I jumped on it but now I am lost. I am blaming no one, just unsure what the wires are. Nearest local help is far and hard to come by.
DM's pnp harness. I see no hanging wires.
My pnp harness without the loom on.
UPDATED: These are the pins that have wires going to no where. I am seeing some other people harness and no one seems to have hanging wires. Confused. I should of ask aaron first but didnt want to bother him too much.
I was looking at the picture of driftmotions pnp harness and notice there are NO cut wires at all yet on my harness I have a few cut wires and even one exposed end and 2 or 3 heat shrinked ends. What would they be? I have a feeling they are AUX to something or am I suppose to connect them all somewhere? I am unable to find the original owner/ unable to get reply from him so I have no idea. It stresses me out and I am unable to find a diagram telling me what pin is really what. Their website has a manual but it still does not really tell me all the pins.
I also notice on the ecu side there is an unwrapped/shielded wire. Is that correct?
None of the wires seem to have ever came from the pin harness plug unless someone did a bad ass yanking clean job on it
I was hoping a simple plug and play and since I found a used one for a good deal I jumped on it but now I am lost. I am blaming no one, just unsure what the wires are. Nearest local help is far and hard to come by.
DM's pnp harness. I see no hanging wires.
My pnp harness without the loom on.
UPDATED: These are the pins that have wires going to no where. I am seeing some other people harness and no one seems to have hanging wires. Confused. I should of ask aaron first but didnt want to bother him too much.
Last edited:
