So I finally got the mechanics of the swap done on Sunday; hoses, fluids, wires, fuel. Tried to crank it and...nothing. Not even a click at the starter. The headlamps work, but the blinkers don't. The climate control and windows don't work either.
The car was originally an N/A automatic. Now it's a 5spd. The wiring harness is from the JDM 5spd, as well as the computer. Is there something like a neutral safety switch or clutch switch that I need to bypass before it will crank. I am hoping it's something simple like this, otherwise I will have to start diagnosing the wiring. Where should I start if I DO have to start going through the wiring? I'm thinking I should start with the jumper harnesses to the dash wiring. Does this hold the circuit for the ignition switch?
Any help or ideas would be greatly appreciated. I am finally sooo close and I just want to get this done!!!
The car was originally an N/A automatic. Now it's a 5spd. The wiring harness is from the JDM 5spd, as well as the computer. Is there something like a neutral safety switch or clutch switch that I need to bypass before it will crank. I am hoping it's something simple like this, otherwise I will have to start diagnosing the wiring. Where should I start if I DO have to start going through the wiring? I'm thinking I should start with the jumper harnesses to the dash wiring. Does this hold the circuit for the ignition switch?
Any help or ideas would be greatly appreciated. I am finally sooo close and I just want to get this done!!!