can anyone point out to me where would the fuse for the alarm system on a N/A 87 hardtop. i think i have a blown fuse. thanks
Alarm fuse location???
- Thread starter akito
- Start date
The alarm has 2 power inputs. one from the CIG fuse and the other from the DOME fuse.
Whats the problem that you are having?
Whats the problem that you are having?
i have had this for a while. i had the other thread saying that when i took out my stereo (stock) my car fail to start. i found out the previous onwer rewired the arlarm and took it out of the alarm box. I got it start after that. The other day i wanted to test if my stereo works or not, because it wasnt working. Thats y i took it out at the 1st place. Now it fails to start again. And i fixed my alarm after i found out that i was rewired. Alarm worked fine. But since i tested my stereo its not starting and my alarm doesnt work any more. No lights when locked. I think i may have blowned fuse or sumthing. I searched TSRM but couldnt find where fuse location is. Can u please tell me where they are spose to be?? thanks a lot
I just said in the last post, its the DOME Fuse and the CIG fuse.
The DOME fuse is in the engine bay fuse box.
The CIG fuse is in the drivers kick panel fuse box.
The DOME fuse is in the engine bay fuse box.
The CIG fuse is in the drivers kick panel fuse box.
hey i cant find the dome fuse in the engine bay guse box. i found the cig fuse tho AND a dome fuse in the driver kick panel fuse box
Sound like there are still grimlins in your wiring. best be is to get rid of the alarm cause it is worthless if the car is a manual trans, cause you can push start the car with the alarm going off.
If you search, you will find things about removing the alarm from the car, cause I have explained it a number of times to others and it is very simple to do. Only requiers one wire to be hooked back up to ground and no more crappy alarm.
If you search, you will find things about removing the alarm from the car, cause I have explained it a number of times to others and it is very simple to do. Only requiers one wire to be hooked back up to ground and no more crappy alarm.
that is correct, with the fuse pulled, the car should start. The only other thing that I can think of is that the alarm needs to be reset.
Put all the fuses back in and lock all the doors, then one by one unlock the driver, then passanger, then open the hatch all with the key. The hatch part generally does not need to be dune, but just to be on the safe side, might as well.
I still am thinking that it is electrical Grimlins being that stuff has been rewired.
Put all the fuses back in and lock all the doors, then one by one unlock the driver, then passanger, then open the hatch all with the key. The hatch part generally does not need to be dune, but just to be on the safe side, might as well.
I still am thinking that it is electrical Grimlins being that stuff has been rewired.
someone say remove the factory alarm?
post #4:
http://www.supramania.com/forums/showthread.php?p=1515#post1515
-shaeff
post #4:
http://www.supramania.com/forums/showthread.php?p=1515#post1515
-shaeff
LOL...i have an auto....but this is WEIRDDDDD....aiite, i remember being by told by the previous onwer. put it in N and try, it should start. i did, and wiggle the N wiring below the gear stick the and it starts. so i turn it off, put it in P, it wont start....weird....REALLY weird. and now, since i got hold of how it functions. put it in N it start ALWAYSS....anyone knos y??? B4 i fixed the alarm. then its fuk up. now for sum reason theres no power (i guess) goes into the alarm. it work like 4 days a go until i try the stereo again. after unpluged it. Alarm is screwed now. I HAD IT WORKING, but w/e, i dont really need an alarm. Just dont kno y the car is like that. but thanks for all the advices
so disconnecting it ALONE wont solve it but i have to ground one of the wired eh. aiite ima try that.Thank you
Yeah, the wire that you have to ground is pin #13 and it is a blue with orange stripe/tracer wire. if this wire is not grounded, the starter will not work.
If you have had to play with the shifter or the wiring in the past to get it to start, the it sounds like the neutral safety switch is going of gone bad and obviusly will cause starting problems.
If you have had to play with the shifter or the wiring in the past to get it to start, the it sounds like the neutral safety switch is going of gone bad and obviusly will cause starting problems.