AEM V1 on Aristo 2jzgte?

[NewGen]

I've looked all over for this answer and have gotten mixed reviews. Is it possible? From what I gathered I believe you just need to rewire the maf for map and adjust the settings accordingly on the EMS. Any help would be greatly appreciated!

Matt

 

[NewGen]

Also i'd like to see if anyone has had any luck supporting 1250cc injectors on an aem version 1.

 

[soapra]

We are running ID2000 cc injectors at the moment, making 815 whp on E85, So, Yes, it is possible to use 1250cc on that box.(must use high impedance injectors or a resistor box for low impedance injectors) The AEM box will work on Aristo harness with out a problem. Use an AEM 3.5 bar map sensor and keep the stock air temp sensor. works just fine.