ACT Stage_3_HD/1J...Anyone running it?

[250sx]

Next on my list is a clutch/pp combo, i've searched and came up with very vague answers.

Whats the torque/rwhp rating?

https://935motorsports.com/catalog/product_info.php?cPath=79_14_148_277&products_id=1502

Thanks, Ali.

 

[250sx]

bump.
=/

 

[Clint]

I am running the same clutch/pressure plate setup, Im not sure of the power rating but it seems to be holding up my my abuse from 7psi to 14psi on my T66 but I'm sure i'm not making anymore then 320rwhp.

 

[tissimo]

psifactor ran that clutch in her car. She was making 400whp and cutting 1.6 60's with it. Its easy to drive too..

 

[rakkasan]

I'm pretty sure pretty sure that's the one I'm running (Aaron will have to confirm) & I hit 527whp/420lb-tq..... A little noisy, you can't ride the clutch a lot in traffic, but all in all it's a great clutch.

 

[drewgo]

OEM PP w/ 6 puck FTW..... beating the hell out of it for over a year now.... and still chugging....
Now watch I jinks myself.....

 

[250sx]

thanks for the responses.

it'll be going on a 1J with 67mm @ ~20psi.

 

[250sx]

OEM PP w/ 6 puck FTW..... beating the hell out of it for over a year now.... and still chugging....
Now watch I jinks myself.....

I was thinking of going this route, i'm scared of it failing tho =/
although Keiron did say he made 590rwhp on a stock pp/6puck

 

[tissimo]

as long as you dont drag race (going buy avatar you dont) stock pp w/ a 6puck would handle ok.. soon as you try to launch w/ tires on that setup, or try to slip it off a launch, itll start slipping on you.

 

[Dylan JZ]

The Action 6 puck seems like a copy more or less of the ACT only the heat treatment is a bit more refined on them.. I'm running it and love it. It will hold like 500ft lbs though, which I sure as hell dont have lmao.

 

[250sx]

as long as you dont drag race (going buy avatar you dont) stock pp w/ a 6puck would handle ok.. soon as you try to launch w/ tires on that setup, or try to slip it off a launch, itll start slipping on you.

40+ rolls always, but I think i'm going to go with the full combo just to be on the safe side.


Lets see if my people come through with the hookups
:cough: dre :cough:

 

[Spaniard]

I run it and it holds great. Easy to drive in during traffic. Yes, some noise, but just do a good resurfacing of your flywheel and you'll be alright. I'm pulling 500rwhp on a good day and it holds just fine over 6 months now.

 

[becauseican]

I run the ACT HD PP with the HPF bronze 6 puck disck, i love it!!!. It has held great for my 500hp/ 470 tq. I wouldnt waste my time with any stock disc/ PP with 300+ hp.