Search results

Can any give me an alternative to the expensive Toyota shims? I need about 18.

I have been looking all over for the net for a complete bolt guide. I finally decided to bring it here. I am looking for a guide that has the bolt length, the size of the bolt head, and where it is located on the engine. Does anybody have a list similar to that? Thanks. Casey

factory hardware was used to replace parts. I have ARP rod bolts and ARP main studs. Is it possible to replace the factory bolts with the new ARP bolts that I have without changing out the new bearings there were put in?

If using 80% duty cycle is recommended maximum, what would be the lowed duty cycle you could have? I want to reach between 600 and 700 hp so using 1000cc injectors seem to be right (using 80% maxmium duty cycle as a ceiling) but is there a point where the injector is too big to allow the engine...

I seen a very interesting performance part on a 7mgte. It was two oversized (I think HKS) injectors that fed into the intake system right before the throttle body. If anyone can get me some information on it would be appreciated.

I am in need of a carfax for a car that I am looking for... 1N4AL11D65N927992 this is the vin number. It is a 2005 nissan altima, manual transmission. Any help would be great. Whasian

I seen awhile back that somebody was using a 2j ignitier on thier 7m. Is this a mod that is worth putting on my car? Whasian

Is it worth doing? I am geting very mixed opinions with this. I am wanting to be able to rev at about 7500 (since the redline on my ecu is about that). What will it do to the integrity of the crank itself. Will it cause any sort of downside? Whasian *I have also heard of a crank...

I was on the 935 motorsport page and read about a company that will sell me 7mgte 264 cams. they take stock cams and they grind them down. Are these cams reliable enough for about 600 hp? What about the cams breaking or having other problems? Will i need to shim? Whasian

I have finished something that took some time, but was worth it. I took 91 harness plugs and cut them away from the harness. So I had the plugs from the 91 harness and I cut my 88 plugs off and replaced them with the gray plugs. Here are the pictures from the evolution...

I have been looking at getting a lightened crank pulley for my 7mgte, but I don't know anyone that is currently running one (or has in the past) is there something wrong with using that crank pulley? Whasian

This happened in a matter of minutes. I happened to be driving back from a good drive, and I started hearing the sound of a rod bearing going out. With nothing else to do, I just kept the rpms low and got home as soon as I could. The car bearly make it home and died in the driveway and...

Can anyone help me. I have a Mines VX-Rom ECU for a 7mgte. There is no information on it though. I was hoping that somebody on the forums could help me figure out that this ecu has exactly. I know that the ignition and fuel maps are differenet. That the rev limit is roughly 7800 rpms. The...

Ok, I just finished a rebuild after a bhg, Everything changed. Every hose and every gasket is new. I have a mhg with arp hb torqued to 89 ftlbs. The car is boosting normaly (but there is a crack in the downpipe so I have a new one coming in on friday) I first put water in the car to make...

I have a 65mm throttle body that I wanna use on my car. The only problem that I have is that the tps on the throttle body is a three wire plug from a mustang. I was wondering if anyone has been able to covert the factory 7m harness to fit that tps with the engine going into default mode...

I came across this video on you tube. What do you think? Whasian http://youtube.com/watch?v=xtf3gNfVlkg

This was too fuckin' funny Whasian

GO CARTING and LASER TAG!!! I am getting working some guys at an indoor go-carting arena to get a discount if I have enough people. Prices will be cheap enough for everybody to go (promise). I am setting the meet for sometime in Late october or the beginning of November I need to know whar...

I wanna let everyone in houston know that Houston Area Supras is offically formed. So far I can count about 13 people that are dedicated to the group. That includes Ken, Ife, John, Pete, Rodger, Jb, Oneil, Steven, Rudy, Ish, Lucky, Tiny, and a few other other (sorry if I didn't include your...

I am having stickers made. If you want a couple (at no charge) I need to know that way know just how many I need to have made. Holla back at me. Whasian P.S. Shirts are also in the process of being made but I wanna get a group together to decide on what kind of shirt we want to use...