Search results

If I read right some where you can actually run injectors straight from piggyback. If so can we get around factory rev limiter like this?

Anyone ever pull there ABS out? If so any tips?

Anyone have a block with crank in it out of a car? I need a measurement from the trans mating surface to crank. Basically how far in is the surface the flexplate bolts to from the back of block. I have a adapter plate from best trans. I also have a th350 built and ready. I just think I...

I am putting a cold start injector back on the car this year, Looking for a used one. My question however here is what size is the banjo bolt for it? I need to get fittings ordered to tie it in to fuel system.

I have been off the boards for years. Is anyone still making 7MGTE to GM trans adaptors? If so I will have a brand new clutch and 5 speed setup for sale.

I have a modified 89 7MGTE supra. I have wanted to go auto for a long time but enjoy trips in the car too much. Well if I have to lose over drive I dont care any more. I have other cars for trips. Problem is does any one make a GM trans adapter that uses the GM convertor still? I have a TH350...

I have looked and cannot find much of best transmissions and the number I called never answers. Does anyone know if Shawn is still around? Who else besides ati offers swap parts? Sorry but I have been busy and off the forums a while.

Was wondering if anyone has tried this part? Seems like it would sit the tubo alot closer than the welded ones. Have a car that i would like to keep the stock manifold on. tired of tubulr ones cracking not to mention cost. ex has all the money now. lol

first thanks to all the great info on here. Been fighting a on and off ignition issue for a while. Added groung to ignitor and wow, all done. so to the new issue. i have been running 18psi for a year now. Problem was car would always fall off power in upper boost rpms. (aka reason i was...

ok guys, i have been away from the supra for a while. Blew the dust off her in the garage and making a few changes. I do not plan to dyno anytime soon and was seeing if anybody had thoughts on power numbers it makes. t67 on hks cast manifold and 38mm tail wastegate ferrea valves, with...

Finally got to look at the issue with my clutch. It was the snap ring that holds the through out bearing in place on the inside of the pressure plate. Guess i need to find the part number so i can order one from toyota. Need to get this fixed so i can kick that cobras ass

I have a 1990 7mgte supra. mods below. This is the problem, car pulls hard until around 5200rpm then falls off. I have tried everything but bolting on a kitchen sink... lol fuel pressure is 38psi at idle and raises to 59 psi under 16psi of boost. My latest thoughts, one of the...

We are planning a supra meet along with FI-R 's nissan meet. They will have several 500+hp sentras there. lets show them why they need rear wheel drive. We have also welcomed the dodge guys and vipers. below is a copy of the original post on myspecv.com We are working on having a portable...

Ok guys if i was to tell yall I have a 1/4" spacer to go between your upper and lower intake mad of aluminum that would give you 12HP and 15lbs of tq and change your power curve for $230 who would sighn up? This company has sold over 200 to nissan customers. We put two cars on the dyno...

well it was late and we had nothing else to do. So we decided to rag out our cars and make some quick vids http://youtube.com/watch?v=V07hDR45Xg4 http://youtube.com/watch?v=YvjP7cW4UHs

Well my dakota will be back up and running this week. So I will be pulling the supra apart to do the 5 speed to auto swap. I have seemed to be able and locate everything I will need. I am very excited and cannot wait to see the gains of going 3 speed auto. By the way I someone wants to do...

Ran into a guy in town That has been wanting to race me. He has a 06 mustang with the usual bolt ons including headers, gears, exhuast, etc. he also put on a kennybell supercharger a few weeks ago. i passed through a intersection and seen him at the light. A made a u turn and caught up to...

I put a new compressor on my car and it does not cycle at all. Compressor turns on with a/c control but does not cycle. Car sat up a while during the rebuild and the compressor locked up. So I put the new on on and was like awsome she cools great. then I noticed it was not cycling, Any thoughts?

Well I got to run a GSXR600 last night. Bike has a titanium exhuast and a few small things. We ran from 40 to 120 and he put about 2 bikes on me. I was very happy with the outcome. We ran twice and this was the outcome both times. Hopefully after some dynotunning we can run again. I will...

first run was my best 60ft of 1.96 but clutch did not like it and had to lift. after that took it easy of the line and ran a best of 12.7 @114.8 I think i will get a new pressure plate while I get and auto ready to go in.