Search results

I have the adaptor plate from best trans. Already have a built TH350. Need to figure out convertor and see if trans clears tunnel.

If I read right some where you can actually run injectors straight from piggyback. If so can we get around factory rev limiter like this?

Anyone ever pull there ABS out? If so any tips?

Anyone have a block with crank in it out of a car? I need a measurement from the trans mating surface to crank. Basically how far in is the surface the flexplate bolts to from the back of block. I have a adapter plate from best trans. I also have a th350 built and ready. I just think I...

I am putting a cold start injector back on the car this year, Looking for a used one. My question however here is what size is the banjo bolt for it? I need to get fittings ordered to tie it in to fuel system.

I have been off the boards for years. Is anyone still making 7MGTE to GM trans adaptors? If so I will have a brand new clutch and 5 speed setup for sale.

140amp Alt. South bend clutches disk and pressure plate Mega squirt 3 with expansion board

I have wanted to go auto for a long time but enjoy trips in the car too much. Well if I have to lose over drive I dont care any more. I have other cars for trips. Problem is does any one make a GM trans adapter that uses the GM convertor still? I have a TH350 and a 700R4 fully built sitting...

Can you delete this thread and I will repost on old one? Dont wanna tie up two sports

Update on the car. Here is a few pics. Car has been enjoyed for a few years now. However big new round of upgrades right now. Mods: NPG MKIII 67mm turbo kit,NPG stainless cat back, NPG front mount intercooler, tial 44mm watsegate, 50mm blow off valve, 550cc injectors, 255lph high...

Thanks

I have a modified 89 7MGTE supra. I have wanted to go auto for a long time but enjoy trips in the car too much. Well if I have to lose over drive I dont care any more. I have other cars for trips. Problem is does any one make a GM trans adapter that uses the GM convertor still? I have a TH350...

just ordered the kit from wier myself. Heard alot of good things.

I have looked and cannot find much of best transmissions and the number I called never answers. Does anyone know if Shawn is still around? Who else besides ati offers swap parts? Sorry but I have been busy and off the forums a while.

Was wondering if anyone has tried this part? Seems like it would sit the tubo alot closer than the welded ones. Have a car that i would like to keep the stock manifold on. tired of tubulr ones cracking not to mention cost. ex has all the money now. lol

well set mainscale at 11 and pulled 5 out of highload in uper rom. no boost cut but was still dipping close to 10.2 . changed to pulling 14 from 4000 and up and its now in the mid 11 range. gotta trim it all up and smooth out the curve i know. but should i pull back on mainscale instead of...

i have the following codes 34 51

first thanks to all the great info on here. Been fighting a on and off ignition issue for a while. Added groung to ignitor and wow, all done. so to the new issue. i have been running 18psi for a year now. Problem was car would always fall off power in upper boost rpms. (aka reason i was...

ok guys, i have been away from the supra for a while. Blew the dust off her in the garage and making a few changes. I do not plan to dyno anytime soon and was seeing if anybody had thoughts on power numbers it makes. t67 on hks cast manifold and 38mm tail wastegate ferrea valves, with...