If you have a (click) when you attempt to start the car emanating from the starter motor/solenoid that is what this writeup is about. If the motor does not even make a sound when you turn the key you may have other issues.
This is a list of what is wrong most of the time
1. The...
This is my write-up, I was hoping to get this in the faq section. Correct me on anything if i'm wrong guys.
If you have a (click) when you attempt to start the car emanating from the starter motor/solenoid that is what this writeup is about. If the motor does not even make a sound when...
These are results from Australia and New Zeland.
It seems our cars are a danger to ourselves and others in a collision. Mostly others.
Taken from this article: http://www.monash.edu.au/news/assets/includes/UCSR-media-release.doc
The Mkii and Mkiii are listed under these categories...
I wanted some pics of the car before the end of the season so me and a friend took some last night. Quality wasn't what i hoped. Snapped a few in the daylight at the end.
Friends car is a 1990 Honda Prelude. 2.1L. Recently painted. the pics don't do it justice the car is mint. Like the...
Well a few times ive gotten the error:
"TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts."
so i investigated thinking it might be spyware. Turns out more of the random connections are to microsoft. Why the hell would a computer connect so...
My fins are chipped to hell on my turbo. Can you replace just the compressor wheel without need balancing etc? How hard is it.
Is this the wheel? It says mr2 but im sure i read the intake is the same...
I just have a question. Its bugging me don't know why.
The stock Crank Pully is a Harmonic Balancer. Which means its more than just a pulley right? As in its acting as a balancer for the crankshaft?
If thats true whats the deal with these?
^Is this an accident waiting to happen or...
I use a switch that goes directly from the battery to the starter because my wiring is bad at the ignition.
Since installing the switch I always start the car like this (when it is cold). I turn the key to START for a few seconds to run the pump. Or else there isnt enough fuel to start the...
http://cgi.ebay.ca/86-92-Toyota-Supra-turbo-7mgte-7m-gte-PX3-Intake-Gasket_W0QQitemZ330138356436QQihZ014QQcategoryZ33668QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
Does blocking the heat from the head to the intake mani help in reducing the intake temperature? Would there be any power difference at...
For all those that said "Its impossible" I made 313hp/352ft.lbs of torque UNTUNED on a mustang dyno yesterday. Ill have the dyno sheet up when i get a scanner to use. I didnt really expect it because of all you guys on the forum. so take that!
-dave
When i first put my motor back in my car the coolant started to gel up and oil would be sitting on top in the rad. I put some kms on the car now and ive flushed it twice. No fresh engine oil but it still gels up in the upper rad hose and on the rad cap. I take it off once in a while and...
I installed my safc yesterday and noticed today that the car would not idle. I checked in the SAFC monitor and it said 0 airflow. I hooked up the orange wire to the harness side of the airflow signal wire. and the Pink to the ecu side as it said to do in the instructions i had. Did i do...
Hi guys. My injectors were clogged and ive reinstalled after being cleaned. Now the car starts and revs perfectly from what i see. But it idles like crap. and after you rev it when the engine is warm it wants to die.
I found an exhaust leak between the elbow and turbo. Im getting a...
Hi everyone.
I rebuilt my engine from the ground up. Titan MHG, Lex AFM, RC 550s, Walbro Pump.
I have full hardpipes (Cooleeze) and Fully Elbow back 3" exhaust.
The car runs very well. Engine is so smooth that you can have beer bottles on top while its running. lol
Anyway. under...
Hey I have someone that says they can get me a set of hood shocks. just needs to know the lbs rating? how many lbs are the shocks? toyota can't tell me nor is it on the shock itself.
I got a large braided fuel line running from the fuel pressure side into the fuel rail which bypasses the stock uhhh thingy? fpd is it? is that ok? any bad effects from bypassing it?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.