Search results

  1. suprajim54

    MHG Leaking?

    I purchased a rebuilt 7MGTE from someone locally last summer and had it installed. I was told it had HKS MHG and ARP Bolts, new stock pistons, Eagle Rods and new bearings with about 15k on the rebuild. I've put about 2500 miles on the engine and keep pushing coolant out the overflow. The cap on...
  2. suprajim54

    60-1 CT26 Rebuild Options

    My car came with a 60-1 Trim CT-26. I think I'm getting the death whine now and have a little more up and down shaft play than I think it should. Boost leak test found nothing and I only get the high pitched metal on metal noise as boost is trying to build. I get no more than about 2.5 psi if I...
  3. suprajim54

    Cold Starts Lean, Warm Up Enrichment Issue

    I'm having an issue with my cold starts being too lean. I have 550's and Lexus AFM running on a JDM ECU. I do not have any codes showing. On a cold start while idling, Vf shows to be 0 volts and the AEM wideband is showing high 17's or blanks out. Vacuum gauge shows about -14 and the car...
  4. suprajim54

    Factory Sunroof help

    I have a 92 with a siezed power sliding sunroof. I hit the button and it lifts up about 1/4" and stops. The motor will keep running, but there must be an issue with the tracks. I've tried turning the manual screw, but it won't budge. I've taken the headliner out, but still can't see any tracks...
  5. suprajim54

    Car idles low/dies when quickly let off throttle

    I have been having an issue with an intermittent low idle/dying problem. I searched but couldn't find any threads with a similar issue. Occasionally, if I'm driving and let off the gas real quick the idle drops to about 500 RPM and wants to die. Most of the time it catches itself and idles...
  6. suprajim54

    O2 Sensor Heater Fused?

    Hey guys, I have a question about the O2 sensor. A few months ago, I bought my 92T with a code 21. I had replaced the sensor with a new Denso 3 wire, but the light was still on (yes, I pulled EFI fuse/disconnected battery). In the meantime, I have been fixing oil and vacuum leak issues and some...