Search results

i solved the problem!!!!!....it was the tps and the cam sensor off a lil symptoms: lazy start, timing really high 25 degrees, bad emmisions and code 51 answer:how i solved the problem i calibrated the tps while the vehicle was idling and that changed the idle and timing also adjusted the...

i solved the problem!!!!!....it was the tps and the cam sensor off a lil symptoms: lazy start,timing really high 25 degrees, bad emmisions and code 51 answer:how i solved the problem i calibrated the tps while the vehicle was idling and that changed the idle and timing also adjusted the...

i solved the problem!!!!!....it was the tps and the cam sensor off a lil symptoms: lazy start, timing really high 33 degrees, bad emmisions and code 51 answer:how i solved the problem i calibrated the tps while the vehicle was idling and that changed the idle and timing also adjusted the...

ya not the afm either!!!!gonna try the cam sensor ps:tps wouldnt make the timing go so hi even if it was bad...my timing goes up to 25 degrees do you know where i can get a nice manual boost control and a boost gauge

does the tps have to be on the throttle body to get these readings..and really haopw sensitive is it can it be done by hand and rotate the tps butterfly valve and check with two people

..what did your timing do exactly

how did you figure out it need to be adjusted and how much adjusting needed..im having the same problem but my timing is hi.....any ideas!!!?

thx shaeff but ive made the tech double check and everything is dead on mechanicaly.....i was getting code 51..!? so i tried 4 differnt tps and got one with a proper reading so i put that on but still no difference? i had an old afm that was no good bad idle but when i put it on it keeps...

ya its been done set to baseline 10 degrees

jus did a mhg everything from a-z has been done mechanically but now im having timing issue.....this is whats happening car sets at 10 degrees but as the car warms up it advances up to 33..ive done all mechanical checks and if it was mechanical it be advancing from start up no?ive also set it to...