Search results

I have an interesting equation here. The car is originally a CA car but the engine is one of those out of a Cressida from Japan. I rebuilt the engine 50k ago and put all the CA smog stuff on it so it would pass visual. It kept throwing a code saying EGR but I replaced everything twice and...

So my car hasn't been running very well for about the past week and today I go out with my dad to try and fix it. About 1 minute after starting the car there is some noise that's louder than a tick and but not as prominent as a rod knock. We listened for the area and it sounded loudest towards...

Alright, I'm in the middle of doing this conversion and I have 2 questions. How do I get that Green tinted screen in front of the analog screen out? And where can I get an analog that isn't green?

Alright, my car has a rebuilt engine with 10k on it and new: Autozone Clutch Set Up Slave Cylinder Master Cylinder Brake Fluid The problem is that after I drive up the incline of a freeway for awhile it starts to make an odd vibration or noise. If my foot is on the pedal half way going...

Hey guys, hope this isn't a stupid question but I was wondering if a 89+ climate control is plug and play with the wiring from an 88. And if it is, how do you do the LED bulb replacement? I've heard of many guys doing this and was wondering if it made that big of a difference or what. Thanks Jake

I want to replace my catalytic converter with a test pipe in order to save the cat. I don't like spending $200 whenever I have to smog the car so I would like to just keep it good until smogtime rolls around. Problem is that I have an O2 sensor after the cat so I don't know if the test pipe is...

Will a 7MGE ECU work from a Cressida for a Supra? Thanks

So my car has been rattling in the rear passenger wheel for some time now but it seems to be getting louder and louder. Now the rear driver side is rattling too. I've checked all the stuff that is right there in front of me after I took the wheels off but there isn't any play in anything and...

So I put on some new springs and struts which are Tokico Illuminas and Eibachs. I'm running 18 wheels and I'm not sure on the spec of the tire but I can post that soon. So when I hit a bump or crank the wheel the front ones rub. Question is how I can avoid that besides getting a different wheel...

Which air filter should I get? Are they about the same performance wise? Or should I just stick with the stock filter?

So I rebuilt my engine about 6,000 miles ago and ever since then I've gotten a Code 71. I scraped all of the charcoal buildup all throughout the entire system cleaned all the metal vacuum lines, correctly routed the vaccum lines, and tested every VSV in the EGR system. I also switched out the...

So my alternator works and holds a charge however after letting it idle for about 5 minutes it gets pretty hot. I had swapped out the bearings from another alternator that were good but it's still getting hot. By hot I mean about 150 degrees F. Any ideas?

I need to replace both mirrors as they are cracked pretty badly. Will a 92 mirror plug right into an 87? If not, what kind of modifications are necessary? It's almost impossible to find 87 mirrors so I figured I'd see if you guys knew if it would work. Thanks.