Search results

yeah i can hit boost with 3/4 throttle or whatever but once i go wot is starts breaking up really bad. Have not checked map sensor. How do i check it?

anybody? ideas on what could be the problem

bump

alright, well i gapped the plugs down to .022 and still breaking up badly at wot. unhooked the boost controller, which wastegate spring pressure is 9lbs, still breaking up... i'm about out of ideas. help please!!! possible bad cam sensor? tps? causing these problems?

I have boost leak tested the car and all is good. Also did a compression test and that was good as well. Is it possible that a cam sensor is causing this problem? I've unhooked one a time and the car still ran but with both unplugged the car doesn't run. It's raining tonight but i'll try and gap...

how do i check or know if it's blowing out the spark? I've gapped the plugs lower with same results...

yes i have wideband hooked up and reading 11.0-11.5 at wot. As far as i know the emanage is working properly, don't think the car will run without it.

okay, first off the whole ignition system is new, and the wiring is good. My problem is that when under boost and then go wot it cuts out bad. Mods are single 67mm turbo, precision 780cc injectors, emanange ultimate, profec b boost controller, ect. The car drives fine other than this problem...