Search results

Hey guys need a lil advice. I bought a 2jzgte from a jdm Supra. Does anyone know for sure if the ECU pinouts are the same as the aristo pinouts?

Hey guys need a lil help i am replacing the front bearing retainer seal in my r154 it was leaking oil into my clutch. Like a dumbass I took the seal out with paying attention to which way it faces lettering in or out, also the depth. Does it sit flush into the retakner housing or does it recess...

I know this is a long shot, I have looked but cant find one. Any of you guys out there know of a company that makes a cowl hood for the mk3. Basiclly a stock looking hood with a 2" raised cowl????

Well I went to go change an elderly ladies flat tire today via my craigslist mechanics ad, And when I pulled into her driveway first thing she said to me was I have one of these sitting out back, not thinking much of it I changed her tire. Then she asked me if I wanted to see her supra...

Ok so I got a dreaded wheel hop issue on my 90 mk3 5sp.i checked all my bushings, differential fluid is full, also new carrier bearing, Also checked crossmember for cracks etc. Everything appears good. I only get wheel hop when im taking off in 1st gear at low RPM. If i launch hard or I am...

Hey guys just wanted to let you know, not sure if you know about this place. But they have carrier bearings for our supras 49.99 shipped to you door, instead of paying $220 from the dealer, or doing the ford ranger carrier bearing swap. I just received mine today and it looks great and of good...

Ok guys i have tried to search and look for the solution online, but I cant find what im looking for. My question is I am trying to repair my AC system in my 90 MK3 turbo. But I cant find the wire that goes to my AC compressor. Can somebody tell me where it is located? Body loom? engine harness...

Does anyone know if I can use a jdm ecu with my US harness? Also my car use to be automatic it is now converted to 5 speed r154, If a install a manual ecu with a manual harness would everything work inside the car? it currently still has an auto ecu.

Well guys i finally cut out the old 02 sensor out of my down pipe that the jackass previous owner welded in. I welded in a plate to my DP and replaced it with a brand new 02 sensor. And I still have a code 21, I checked all the wiring at the ecu for continuity and i even hard wired a wire from...

Anybody know where i can by the wire for the knock sensor rewire ( (multi stranded awg 22) 10 base two) i been looking around at a few places but cant seem to find it. :1zhelp:

Does anybody know the piston to bore clearance spec for .020 NPR pistons??? (Same ones from drift motion)

Seems everybody has the grey,blue or red interior. Am I the only one out there with the brown and leather tan interior. I have never seen another one with my interior color scheme is this an uncommon interior? or do people just think its ugly. lol At first I didnt like it but its grown on me.

Hey guys I notice in the pics some of you guys cut out the mesh piece on the 89+ front bumpers to show off the after market intercooler. What I wanted to know is are there any tricks to doing this? I know it leaves little v shaped slots on the inside. But how does the lower lip hold up when its...

I am having trouble finding Precision fit intermediate bearings for the oil pump driveshaft i can only find these semi fits that need reemed out after installation. Advice anyone?

Looked around, cant seem to find the torque spec for the factory oil filter elbow adapter for the 7mgte.. Anybody?

I rebuilt my 7mgte engine about 2 weeks ago, new bearings all within specs new rings, Everything was done the right way. Everything torqued down to specs. I started it up had a terrible knock drove it a lil, same thing. Pulled engine out and put it on the engine stand. Pulled oil pan off...

For the swap I need, and please correct me if im wrong. 1jzgte (8 bolt flywheel) 1jzgte/R154 (Bell Housing) DriftMotion (Motor Mounts) The main question I have is I know the Aristo 2jzgte needs the new sump pump in order to drop into the MKIII. But does the Supra 2jzgte drop right...

The previous owner of my supra broke the connector to my tps its a 4 wire tps and i have the grey plug engine harness. So the tps connector wires are just hanging there. 2 silvers 2 gold does anybody know the color code so i can hard wire it to the tps, I have looked through the tsrm cant seem...

I am putting my supra back together, when i bought it, it was in a million pieces so i am not sure where everything goes. The build is going good so far. My question is under the fuse box in the engine bay I noticed 2 black plugs coming from (underish) the fuse box both plugs have 2 decent sized...

Well I am debating on what type of rings to go with, I know iron rings provide a better seal, but chrome rings hold up better under extreme conditions. So i figured i'd ask the forum, for advice and input on past expiriences.?.?..