Search results

  1. T

    any tips or tricks?

    You have to remove the line from the block, its too difficult to remove from the turbo while in the car. You can get to it with a 6'' extention and a 12mm deep well socket from the bottom side; hope you have good feeling and good dexterity in your hands!
  2. T

    Direction Needed

    Doesn't the crankcase run mostly neg. pressure?
  3. T

    Direction Needed

    About 100 miles but I thought the rings seat after 15-20 min.
  4. T

    Direction Needed

    help me please
  5. T

    Direction Needed

    Is it normal for new rings and new pistons on a new bore to have blow by under moderate boost (12 psi)?
  6. T

    Direction Needed

    Hope this works!
  7. T

    Direction Needed

    I'm 99% sure I have all the PCV lines hooked up properly w/o any kinked lines. I'll work on photos!
  8. T

    Direction Needed

    I have a freshly rebuilt 7mgte motor with JE pistions, HKS stopper HG, ARP head studs, APR rod bolts, new LIPP Boss jr turbo, spearco intercooler, turbo smart 50mm bov, RC 550's, maft pro, and Weapon R cold intake. The issue I am having is the Dip stick keeps popping up. When I open the oil...
  9. T

    maft pro O2 sensor

    I've seen the code 24 fix for the intake temp sensor but not for the O2. I'll continue my search!
  10. T

    maft pro O2 sensor

    Has anyone addressed the cel when disconnecting the NB O2 in order to use the PT Tracking?
  11. T

    Wiring harness Question

    A while back someone posted a pic of an engine wiring harness and had all the connectors labeled and I searched high and low for that post. If anyone knows of could you let know? Thanks
  12. T

    O2 sensor wiring

    sounds like a plan.......... Let me know if you visit!
  13. T

    O2 sensor wiring

    I did see the manual and my wire colors were different.... (the owner before me hacked the harness) but I will be able to fix the problem now, THANKS!
  14. T

    O2 sensor wiring

    I had to replace the plastic connector on the harness side of my O2 sensor. I think I may of F-ed up the wire order. Can someone let me know which wires on the harness correspond to which wires on the O2 snesor? Any help would be much appreciated!!!
  15. T

    Jack r u on line here?

    Jack r u on line here?
    • teebone
    • Profile post
  16. T

    turbo oil return line

    Yep it's me
  17. T

    turbo oil return line

    What path does the oil take to get back to the pan? Does it go thru the block and free fall down or does it go thru a passage way?
  18. T

    turbo oil return line

    Straight line no kinks from bottom of turbo down to block.
  19. T

    turbo oil return line

    Yes, I'm using the stock location for the return line. I dont get how this could obstructed then
  20. T

    turbo oil return line

    The obstruction must be in the block... the lins was clear. Turbo is a Boss Jr. from Suprasport.
Top Bottom