Search results

  1. hvyman

    You should have 33-40 psi. You could either have a leak, bad pump, or bad regulator, or clogged...

    You should have 33-40 psi. You could either have a leak, bad pump, or bad regulator, or clogged filter.
  2. hvyman

    lost egr cooling plate gaskit HELP!

    Yeah wait. Its not going to be fun WHEN it blows without the proper gasket.
  3. hvyman

    Oil overfill?

    I dont think you have the right dipstick or stick tube. Something is off. Mine is full at 5 but i always go 6. I thik you can have something like 9 qts in the pan before the oil touches the crank but i wouldnt run it like that.
  4. hvyman

    No start (spark?)...

    Get someone to crank the car over for you while you jiggle the cps wires and the other mess of wires right there. Buddy got stranded at the junkyards one day with the same problem and code 12. I jiggled them and it started right up. My car does it sometimes and many other people have had...
  5. hvyman

    Bypassing the Heater core?

    No soldering needed when you get a new one. Its got o rings and clips. The only down side to by passing it is the heater core acts like a another small rad, but you should have no problems driving around as long as everything else in your cooling system is up to par.
  6. hvyman

    starts up but dies help please?

    ^ I agree. You have a loose wire somewhere from what you did. And prolly a dirty isc if you did not take it off when you clean the manifold.
  7. hvyman

    started car after 2 years and the idle is lumpy (revs to 2k)

    Tps needs to be adjusted. http://cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=FI&P=103 Put the DP on a well as you dont want to start a fire.
  8. hvyman

    CPS Rebuilding

    You cant reuse your old one? Post on the wtb section and look in the for sale section and look for a junk one.
  9. hvyman

    Going lean under boost

    I know its stupid but your not out of meth are you?
  10. hvyman

    What type of title does your Supra have?

    Mine is a clean title. Dont think ill ever buy a slavage car again even if it was minor.
  11. hvyman

    Starter install

    If you lift the car up enough you might be able to get one hand with a wrench and try to wedge it in place and then use the other hand either with a impact or ratchet with like 1-2.5 of extensions with a 14mm swivel at the end. Thats how i did it but im small with small arms.
  12. hvyman

    The new funky_monkey58 build thread sleeper style?

    Welcome back. Cars looking good.
  13. hvyman

    grinding into reverse! help please

    Try bleeding your clutch again. you might have some air left in there. 3rd to reverse seems to work almost every time for me.
  14. hvyman

    Socal: Toyota Museum Meet - July 24

    Looks like there should be enough parking. Attendees: 1. Rodel 2. SuprA70 3. kingerm 4. 91mk3supra 5. super.secret.supra.club 6. my95genIV 7. MB38 8. akeosh 9. Shant Tarbinian 10. rpsil13 11. buckweed 12. Nick Stonawski 13. Da BlaCkMoBiLe 14. rmjsupra 15. Suprajoey 16. Razoe...
  15. hvyman

    I had this car for over 2 years and i had another before that for 3 years.

    I had this car for over 2 years and i had another before that for 3 years.
  16. hvyman

    Dyno meeting holland 2010

    Nice video and ncie cars.
  17. hvyman

    Hard time downshifting into 2nd

    Rebuild or known good used. Rebuild would be well worth if if its done correctly.
  18. hvyman

    Just Got Some Eibachs

    +1. There 100 each at autozone but there lifetime warrenty and when there blown you just trade them in.
  19. hvyman

    Hard time downshifting into 2nd

    Mines kinda like that. The first shift into 2nd is always funny cold unless im going slow.