Search results

Can you post pics of your adapter? I am trying to find a way to do the sam to mine. did you find where you leak was?

thanks i found a few things but i just cant get the marks lined up i have a post up on cps install? if you read it youll know exactly what my issue is

Can you repair an afm that tests out good but was cleaned with brakeclean or any other type of cleaner?

what thread did you use to find the cps install i am in the same position, but mine dies when i let off throttle? i know how to install but i can not get it lined up according to tsrm

I am trying to set my cps sensor and the groove and the machined hole are not lining up when in the head. Gear has not been changed to the best of my knowledge. Is it possible for the gear to be installed 180 opposite? When installed the signal rotor is one tooth off in either direction cannot...

can someone please tell me why they use a resistor for the fuel pump?

Ok so i have a little update on my situation. Went through rechecked the basics timing, tps , cps, afm and so on. Found that when i tap throttle and right before car dies or attempts to the fuel pump relay clicks back and forth as the car is hesitating. I see the resistor in there and that my...

Both ways are obviously not sure fire ways of determining a rod knock but but beats pulling the pan off. Plus you can kinda verify in about what area it is in.

Not sure if this will work on a supra but it does on the 3.0 v-6, I found a rod knock by grounding out plug wires with a test light. I guess depending on the severity of it it will work. Get it up to your "knock" rpm and simply ground one wire at a time. If the knock goes away, you might have a...

Good call JET i am actually about to go and start pluggin some of those valves/hoses just to see. I have been kinda leaning towards a false code atleast that is what i am hoping for, before deleting the egr i found that when i apply vacuum to it it idles up leading me to believe i have a vacuum...

Alright Ill do that. sorry for the multiple threads

I am not trying to but i am not getting any help

The entire system is stock, so no aftermarket blow off valve, what is the valve from the accordion to the 3000 pipe? has the vacuum port on it? how should that operate? As far as the trouble codes i have none when cleared and engine idling hit throttle and release sets afm code like...

Ok post number 3 on this damn car still cant get any help to solve the problem. Ok here is the problem: ****Car dies when let off throttle, neutral or running. High rpms, or idle. sets code 31 when dies***** The car: 1989 supra 7mgte all stock, with exception of hollowed cats(plugged) and...

any particular places? i have checked almost evey inch of hose. What is the valve on the accordionjust in front of the turbo? When i took the car out (the only time) it seemed to had good boost psi, 5 or 6psi. the only thing is it will not stay running when let off throttle. I have checked the...

I am having the same issues dies soon as you let off throttle, but idles fine before you do so. Not stealing thread just hoping your problem and mine get solved.

I have a similar issue, Alt not charging (charge light not on but does work with key on) replaced with known good one (free) Test with voltmeter car running 14.2 volts, car revved up idled fine, then all of a sudden BAM alternator not charging except off idle? belt tight, all fuses appear to be...

I tried adjusting that but no change in how it acts everytime like clockwork same thing, even barely touching the throttle by hand it does it. and sets code 31. I have good vacuum in engine 12 inch, good fuel psi and doesnt drop when car dies. pulled turbo pipe off to intercooler still runs...

Ok i have made one post earlier about code 31, got off topic and not much help so here goes again. Car starts and idles fine revs up but soon as you let off it dies, sometimes will regain and keep idling but rough. I have went through replaced the afm, checked and tested resistance and hz on it...

The afm (correct one now) tests out good. the car idles fine here and there tap throttle and dies and sets the code. its really annoying i wanna get it on the road before the snow. But this setup is having me run in circles. I am mechanically inclined but this is a new system to me.