Search results

  1. I

    Jay's Rebuild 7MGE to 7MGTE Conversion

    If it's the Genuine Toyota SST it's a 50x100mm ;)!
  2. I

    Cam talk

    There are 2 flats on the cam that you can hold with either a normal wrench or a big crescent wrench.
  3. I

    Cam talk

    The belt ;)
  4. I

    Cam talk

    I'm a bit confused.... You're talking about the Cam Pullies where the belt is? You undo the 2 x14mm bolts then pull the pully towards you.
  5. I

    Brake Tube Tools

    Stainless is much harder/brittle.
  6. I

    Happy Birfday To ME!

    HB Shaeff.
  7. I

    Cam talk

    Undo the bolts and they should slide off by hand.
  8. I

    Group A's group a rebuild

    Getting there Steve! How close is the CPS to the Comp Cover?
  9. I

    Why so many spring mods and no sway bars?

    Geez: I went with a little stiffer Springs + Koni Yellows then had a Pair of solid Bars made, this way I have vertical compliance with minimal roll making the car really comfortable to drive!
  10. I

    Plug that I have no idea where it goes

    Yep Toyota used a universal harness that has both manual and auto plugs on it so just tape it to the harness so you can't see it! (just in case you forget for next time)
  11. I

    Plug that I have no idea where it goes

    If your car's a 5 speed you could be looking at the Auto Plug.
  12. I

    Brake Tube Tools

    I had to mod my flaring tool to get a true double lip flare that you need for brake lines.
  13. I

    Happy New Year Everyone!

    Back at ya Ken! No resolutions for me I'll continue to treat people how I expect to be treated and enjoy life!
  14. I

    1JZ flow map GT30R

    Pretty well backed up in the real world when I ran the GT30 earlier in the year on my 7M TH. (Actual numbers were 400 rpm lower due to 500cc more)
  15. I

    misfiring

    BZ: Seems to be quite a few instances of bad CPS wiring and corrosion of the connectors! Try clipping/unclipping the connector a bunch of times to see if it makes a difference.
  16. I

    Good Engine shops in Califronia?

    Total seal rings are problematic in 7M's as the cast iron in the blocks is so hard they don't seem to seal.
  17. I

    gauging interest in 7m PHENOLIC GASKETS SET..

    Joel: LOL you're most welcome! Just thought of another potential downside...... Not sure with the material you're considering but the old Phens had to have a gasket on each side (often this was all that held em together when you unbolted em) Seems like another layer of...
  18. I

    pics of BOSS installed

    Mark: Thanks! It's a beautiful Turbo I did the sums the other night when Allan was here and it's a killer deal as well! (Even including shipping to Australia)
  19. I

    SySt's Build up

    Syst: It begins! Good luck this will be something I follow closely! :)
  20. I

    pics of BOSS installed

    Malloy: Just interested in why you chose this route instead of a tube header?
View older results
Top Bottom