Search results

  1. I

    always pig rich.. need help.

    02 may be fouled from running rich but usually this will cause it to read at stoich all the time.
  2. I

    Simons JZA70 (56k....)

    Loonie: LOL it's all false rumours started by Jon I said no such thing! (living in Australia I KNOW All of you Kiwis live in an outer Auckland burb.......Bondi!) I had my white Mk3 parked nose to nose with Allan's black one and yep white looks phatter! Just from certain angles Simons...
  3. I

    Simons JZA70 (56k....)

    Simon: Is that a narrow body car? (I think MDC/Jon has our countries mixed up as Sheep are an NZ thing and Roo's an Aussie thing) ;)
  4. I

    Firing order arrangment Q's for Waste spark

    I made my own Hall Effect CPS so yes it's single trigger. CPS And this is how I did the crank trigger!
  5. I

    HK$ cast mani copy

    And they're MUCH quieter as you don't get the ringing noise of a tubular!
  6. I

    Firing order arrangment Q's for Waste spark

    Most standalones will give you the option for different triggers. On mine I use a single trigger on the CPS for refference and 3 triggers on the flywheel for firing events. Does the MT site have any clues? Direct fire would be better if you can sort it out.
  7. I

    Firing order arrangment Q's for Waste spark

    7M CPS sounds much the same as yours 24/1 but with 3 pickups.
  8. I

    BOSS 550 Dyno Video!

    DOH! Less Dicking more Dynoing! ;)
  9. I

    SSautochrome

    I sold mine to SuprraGrl and am using the internal gate on the 3540. Not sure how far off her car is from running.
  10. I

    Firing order arrangment Q's for Waste spark

    Don't really know anything about the MT ecu's but it should have an option for waste fire in it's configuration section. If not it's Coil drivers may not have enough juice to do the job in wastefire mode. Personally I'd go for individual coils if you have that option.
  11. I

    Hello! New to this forum...

    LOL whenever anyone mucks up we hurt Dead! ;) Hope ya enjoy SM David!
  12. I

    taillight conversion

    Ditto!
  13. I

    7msupraPower's build-up

    Very nice! What's the coating on the Balancer pully?
  14. I

    Waffles vs. Pancakes vs. French Toast

    After he eats the Waffle Iron he craps out enough parts to make Bender ;)!
  15. I

    Waffles vs. Pancakes vs. French Toast

    I bet Chuck Norris would eat waffles iron and all! Tell him he's not a real man!!
  16. I

    #4 main bearing cap "stuck"

    Wayne: Turn the crank a bit ;)
  17. I

    Waffles vs. Pancakes vs. French Toast

    Real men eat waffles ;)!
  18. I

    Waffles vs. Pancakes vs. French Toast

    Before the Hack Waffles were ahead 2:1 I can't believe we've lost half of our support base since then!!
  19. I

    water air intercooler

    Indio: I run W>A on my car but don't have any A>A figures for comparison! I know my IC is quite efficient with minimal pressure drop and keeps the charge temps under 50c so I'm happy!
  20. I

    #4 main bearing cap "stuck"

    Eric: If they're a loose fit ya have troubles ;)! Kurt: Yep been doing that way all my engine building life not sure if anyone showed me or like you I just did it that was cos it works!
Top Bottom