Search results

  1. I

    How strong is the stock rear end?

    Sustained high speed runs or acceleration at high speed will kill the pinion bearings in the G series diffs, not an issue for the drag guys but road racers should be aware of this.
  2. I

    Finally, 4 months later, but would you expect less?

    Pinion angle maybe..... Either that or it's long enough to have gone "critical" speed wise if you drive fast.
  3. I

    Extra Hex Plug - Unsure of Location

    14mm ones that hole the Plug Galley cover on between the Cam Covers
  4. I

    Group A's 1G GTE narrow body targa with Link G4 Storm ecu

    LMAO the Titanic was lighter than mine :)
  5. I

    Group A's 1G GTE narrow body targa with Link G4 Storm ecu

    Looks like a Supra before puberty kicks in ;)
  6. I

    S2 Now makes Carbon doors :)

    This was posted as a joke right??? Either that or you're 12 years old...... :nono:
  7. I

    2 step/antilag EGT's

    Quake: Get it happening lazy ;) Dats: That's what I'm trying to figure out. Colin: Shhh you're not meant to mention that ..... SK24: Ummm I was after EGT numbers :)
  8. I

    what can i make in metals class

    Mk3's have a seal under the hood so this is cosmetic..... :nono:
  9. I

    Extra Hex Plug - Unsure of Location

    If it takes a 10mm key it's probably the one behind the timing cover......
  10. I

    tranny fill

    Should be a 24mm plug on the exhaust side of the trans then.
  11. I

    tranny fill

    Manual or Auto? Manual is on the right side of the trans case about half way up Auto is the Dipstick tube.
  12. I

    2 step/antilag EGT's

    Quake: Make sure you remember this thread soon as you have some data ;)
  13. I

    Which Cam is better for 450 to 550 Hps goal?

    The BC 272's are pretty close to what I'm running and I think they're great Cams for something that will be driven on the streets.
  14. I

    Which Cam is better for 450 to 550 Hps goal?

    This is what I'm using for mid 500's .351"/9mm lift 280 degrees duration 226 @ 50thou
  15. I

    Coolant temperature issues.. Advice?? Ideas??

    Half blocked Rad dirty water jackets in the block and no undertray WILL make it run hot...
  16. I

    developed rod knock on new motor

    I shim mine 6mm.
  17. I

    2 step/antilag EGT's

    Anyone have any numbers?
  18. I

    No Horsepower

    Check the basics Ign and Cam timing Plug gap Do you have any dyno charts showing AF's?
  19. I

    350 in supra

    I thought we as a community had gotten past the "It HAS to have a Toyota motor to be a Supra" bullshit.....:nono: (funny how those most vocal are the same people that advocate stripping out all of the features and comforts that make a Supra a Supra......)
  20. I

    Finally, 4 months later, but would you expect less?

    Any clue to what caused the failure?
Top Bottom