Search results

  1. I

    Milo's Booster Seat...

    Just finished here :D
  2. I

    400rwhp electric bike + goober = DoH!

    You need a MiniVan for it to be mind numbing ;)
  3. I

    400rwhp electric bike + goober = DoH!

    I love the "James Bond" style shoe ejector ;) Might explain the single shoe/boot you see on the road now and again!
  4. I

    400rwhp electric bike + goober = DoH!

    This was never going to end well!
  5. I

    name this clutch

    "Barry"
  6. I

    Just Another Rebuild

    LMAO we should start a "Who will be running first" poll I can think of 10+ entries already :D
  7. I

    14point7.com cheap wideband?

    Powerdex ;)
  8. I

    Just Another Rebuild

    LMAO is this a contest to see who can take the longest? ;)
  9. I

    Metal head gasket RA specs

    Rich: Try the diamond it's amazing :)
  10. I

    Is it possible to use a 7M distributer inplace of a 7M CPS??

    3P: You could swap the GTE coils into the Distributor if it is a factor.
  11. I

    Liquid filled Autometer gauge. Can you add more liquid?

    LMAO!
  12. I

    Is it possible to use a 7M distributer inplace of a 7M CPS??

    Darrow: thanks it worked well with the crank trigger. I can't see a reason why it won't work as both use the same triple trigger layout and 24 tooth reluctor.
  13. I

    Metal head gasket RA specs

    50 is Cometic Not many places will have the gear needed to measure RA so you're getting their "best guess" below 50 anyway. I have my shop cut the very best/smoothest they can then Lap it using diamond paste.
  14. I

    Is it possible to use a 7M distributer inplace of a 7M CPS??

    Darrow: The 7M Distributor has larger bearings and a long pilot that runs in a bush in the head so "should" be quite stable at high rpm once you lose the rotor! I used one as a CPS with a Hall sensor as the trigger to sync my standalone.
  15. I

    Turbo oil filter ideas (to filter the turbo feed)

    Below a certain size particles in the Oil can't cause wear (think it's 15 microns but not 100% due to faulty memory ;) ) You can get too anal with this sort of thing and my concern would be the small inline filter hetting blocked in time and restricting flow without you knowing.
  16. I

    Is it possible to use a 7M distributer inplace of a 7M CPS??

    Dirgle: If that's the case sure it has the same reluctor and triggers so I can't see why it wouldn't work. Would just need to lose the Cap and rotor and make a cover to pretty it up a little.
  17. I

    Turbo oil filter ideas (to filter the turbo feed)

    Ummm it's already filtered ;)
  18. I

    Is it possible to use a 7M distributer inplace of a 7M CPS??

    Was only running it to 6000 and it was fine, Ign ran out of puff at higher boost and was blowing the spark out at tq peak on the rollers. With a beefier Coil it would have been better, I ended up using it to trigger a standalone and swapped in a different Coil and Igniter then went full...
  19. I

    Is it possible to use a 7M distributer inplace of a 7M CPS??

    One of my early builds I used an NA Distributor and it was fine at moderate boost levels (12>14psi)
  20. I

    Official Samco 7m hose sets.

    Steve: What colour hose?
Top Bottom